Home
SBC-3.5-MX8

Vai alla fine della galleria di immagini

Vai all'inizio della galleria di immagini

SBC-3.5-MX8

SBC 3.5" con processore NXP i.MX 8. (THEMIS - C43)

Disponibile nell'intervallo di temperatura industriale

Data sheet

Wiki

Contattaci per maggiori informazioni e per preventivi

Contattaci

Cpu

NXP i.MX 8 Family

Grafica

2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit/XVSX (QuadMax and QuadPlus)

Connettività

2x Gigabit Ethernet interfaces

Memoria

Soldered down LPDDR4

Dettagli Prodotto

Informazioni tecniche

Descrizione	SBC 3.5" con processore NXP i.MX 8
Cpu	NXP i.MX 8 Family: i.MX 8QuadMax: 2x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F i.MX 8QuadPlus: 1x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F
Numero Max Core	8
Memoria	Soldered down LPDDR4 memory, 64-bit interface, 1600MHz. Base configuration 2GB, up-scalable to 4GB, 6GB, 8GB
Grafica	2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit / XVSX (QuadMax and QuadPlus) 1x embedded VPU, supporting H.265 (4K30) and H.264 (1080p60) decoding and H.264 (1080p30) encoding Supports 3 independent video outputs (total combined resolution 4K)
Interfacce video	OUTPUTS: HDMI® output (Micro) Optional eDP 1.4 interface Optional Single/Dual-Channel 18-/24- bit LVDS interface INPUTS: HDMI® input 2x 4-lanes MIPI-CSI Camera interfaces
Risoluzione video	HDMI®: Up to UltraHD (4K) LVDS, eDP: up to 1080p
Memoria di massa	eMMC 5.1 drive soldered on-board, up to 64 GB 1x S-ATA interface available on M.2 Socket 2 Key B slot (interface shared with PCI-e x1) microSD card slot 4MB QuadSPI Flash NAND (boot device only)
Rete	2x Gigabit Ethernet interfaces Combo WiFi 802.11 a/b/g/n/ac + BT LE 4.2 module with ceramic SMT antennas on-board M.2 Socket 2 Key B Slot for M.2 Modems M.2 Socket1 Key E Slot for WiFi + BT external modules
USB	1 x USB 3.0 Host port on Type-A socket 1x USB 2.0 OTG port on micro-AB socket 1x USB 2.0 Host port on external Type-A socket 1x USB 2.0 Host port on internal connector 2 x USB 2.0 ports available on M.2 Key B and Key E slots
Audio	I2S Audio Codec HP + MIC interfaces, available on a single combo TRRS connector
Porte seriali	1x UART TTL 1x RS-232 / UART TTL configurable 1x RS-485 / RS-422 / UART TTL configurable 3x CAN interfaces
Altre interfacce	4x Analog Inputs 6x GPIOs SPI interface I2C interface Embedded additional RTC circuitry for lowest power consumption SIM dedicated slot
Dispositivo di alimentazione	+12VDC ± 10%
Sistema operativo	Wind River Linux Yocto Android
Temperatura operativa	0°C ÷ +60°C (Commercial version) -40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensioni	146 x 102 mm (5,75” x 4,02”)

Software

Link	SECO Technical Resources

Documentazione

Data Sheet	[Datasheet] SBC-3.5-MX8 Rel 1.3
Manual	[Manual] SBC-3.5-MX8 Rel 1.0 (only for Rev A/Rev B) [Manual] SBC-3.5-MX8 Rel 2.2 (only for Rev C/Rev D)
Image	[Picture] SBC-3.5-MX8_front [Picture] SBC-3.5-MX8_back scont

Part Number

Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.

Elementi prodotti raggruppati
SC43-3341-1211-I2	Descrizione Part Number SBC-C43 w/i.MX8QuadMax @1.6GHz, 8GB LPDDR4, 32GB eMMC, LVDS(12V,3.3V)+eDP(12V,3.3V)+HDMI, CSI, HDMI in, GbE+USB3.0 conn, GbE+USB2.0 conn, M.2 KeyE, M.2 Key B, 3x CAN, 1x RS-232, 1x RS-422/485, 4xAnalog In, Ind. Temp.	Contattaci

Non hai trovato la soluzione per i tuoi bisogni?

Il prodotto standard non risponde alle tue necessità? SECO è disponibile a studiare con te la customizzazione, fino al 100%, di hardware e software.

Scopri di più