DEV-KIT-COMe-T7

Disponibile

Cross Platform Development Kit compatible with both x86 and Arm COM Express® Type 7 modules.

Richiedi un preventivo

0,00 USD

Datasheet

Clicca per scaricare

Manuale

Clicca per scaricare

Clea OS

Visita pagina

Visualizza tutte le risorse

Security & Compliance by Design

SECO products integrate security functions that enable out-of-the-box compliance with the RED directive [EN18031-1]. Certification documentation is available upon request. Security monitoring, patching and update automation are powered by Clea.

Secure Boot

Built-in Secure Boot to ensure system integrity from the first startup.

OTA Updates

Remote and secure software update distribution for your devices.

Device Monitoring

Continuous monitoring of device status and activity with Clea.

Secure Operating System

Yocto-based OS integration for customizable and secure system builds.

Certified Security

Compliance with EN18031-1 standards for secure and reliable embedded systems.

Docker Technology

Isolated and flexible application management through containerization.

Specifiche teniche

Descrizione	The Development Kit contains the following material: - CCOMe-C79 Carrier Board - 1x Serial Adapter Cables - 1x SATA cable - Front Panel module V995 with connecting cables Module not included. Must be purchased separately
Mass Storage Description	2x SATA 7p M connectors µSD Card slot (interface multiplexed with GPIO header)
Networking Description	1x GbEthernet RJ-45 connector 4x 10Gbase-KR interfaces on OCP Type-C connector 4x MDIO I2C interfaces on internal pin header 4x SDP interfaces on SMA RF connectors
USB Description	4x USB 3.1 Host ports on Dual Type-A sockets
Serial Ports	2 x RS-232 ports on dedicated pin header (from module)
Other Interfaces	BMC connector with SM Bus, I2C, LPC, 1x USB 2.0, 1x PCI-e x1, NCSI signals 4 x GPI + 4 x GPO pin header (interface multiplexed with µSD slot) SPI Flash Socket Button / LEDs front panel header 4-pin tachometric FAN connector I2C + SM Bus on feature Pin header I2C Flash Socket SM Bus Smart Battery Connector 4 x 7-segment LCD displays for POST codes LPC/eSPI internal header USB Overcurrent header JTAG connector FuSa header SPI Flash header Buzzer
Power Supply	ATX 24 poles connector for carrier board working only Auxiliary 12V connector for carrier board working only 12 VDC power in connector for COM Express module’s working Cabled Coin-cell connector for RTC
Operating Temperature Description	0° ÷ +60°C (commercial version) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensions	305x244 mm (ATX form factor, 12" x 9.6")