it
de 
en 
es 
fr 
jp 
ru 
zh Carrier-SMARC-E71
Carrier-SMARC-E71
Disponibile
Carrier board for SMARC 2.1.1 modules in a 3.5” form factor
0,00 USD
Security & Compliance by Design
SECO products integrate security functions that enable out-of-the-box compliance with the RED directive [EN18031-1]. Certification documentation is available upon request. Security monitoring, patching and update automation are powered by Clea.
Secure Boot
Built-in Secure Boot to ensure system integrity from the first startup.
OTA Updates
Remote and secure software update distribution for your devices.
Device Monitoring
Continuous monitoring of device status and activity with Clea.
Secure Operating System
Yocto-based OS integration for customizable and secure system builds.
Certified Security
Compliance with EN18031-1 standards for secure and reliable embedded systems.
Docker Technology
Isolated and flexible application management through containerization.
Descrizione
|
Carrier board for SMARC 2.1.1 modules in a 3.5” form factor |
|---|---|
Video Interfaces Description
|
1x HDMI® output 1x DisplayPort (option, via dual stack with HDMI®) 1x dual LVDS or eDP (option) 1x MIPI-CSI2 4-lane 1x MIPI-CSI2 2-lane |
Mass Storage Description
|
SSD M.2 2242 2280 Key B via 1x SATA/2-lane PCIe (option) 1x SPI flash Micro-SD card (option) |
Networking Description
|
2x RJ-45 2.5 Gigabit Ethernet connectors (via dual stack connector) 1x M.2 2230 Key E for Wi-Fi/BT 1x mPCIe half-size or full-size (cellular modem capable) 1x uSIM slot selectable for connection to mPCIe or M.2 Key B slot (option) |
USB Description
|
2x USB 3.0 Type A (via dual stack connector) 1x USB 2.0 Type A connector 1x USB OTG micro-AB connector |
Audio Description
|
Texas Instruments TLV320AIC3204 audio codec TRRS jack (stereo output, mono mic input) I2S/HDA header |
Serial Ports
|
1x serial header with: • 1x RS-232 / RS-422 / RS-485 • 1x RS-232 (option with UART) 1x UART (TX/RX signals only) on header (intended for debug) |
Other Interfaces
|
1x expansion header with: • 1x I2C bus • 1x SPI bus • 1x UART (option with RS-232) 1x header with 8x GPIOs 1x external power output header providing 5V @ 1A and 3.3V @ 1A Boot mode selection switches 1x CR1220 coin cell socket for real time clock voltage 1x power button 1x reset button 1x front panel signal header (fan, 2x LED, power button out, reset button out) |
|
Power Supply
|
9–24VDC input (Molex 0768290102 connector) |
Operating Temperature Description
|
-40°C to +85°C |
Dimensions
|
147mm X 101.6mm (3.5” form factor) |