Carrier-COMe-T6-E10

Carrier Board for COM-Express® Rel. 3.1 Type 6 Modules for Development

Data sheet

Contattaci per maggiori informazioni e per preventivi

Contattaci

Cpu

COM Express 3.1 Type 6 Carrier board ATX form factor Especially suited for development and debugging of COM express modules Separated power supply for COM Express module and carrier board

Dettagli Prodotto

Informazioni tecniche

Descrizione	Carrier Board for COM-Express® Rel. 3.1 Type 6 Modules in ATX form factor. Especially suited for development and debugging of COM Epxress® modules. Separated power supply for COM Express® module and carrier board.
Interfacce video	3 x DP++ connectors or 1 x DP++ connector and 2 x USB4.0 Type-C with Alternate-Mode VGA connector LVDS 24-bit Single/Dual Channel eDP 4-lanes 40 poles VESA connector Backlight control + LCD selectable voltages dedicated connector LVDS External EDID flash socket
Memoria di massa	4x S-ATA 7p M connectors μSD Card slot (interface multiplexed with GPIO header)
Rete	1x GbEthernet RJ-45 connector
USB	2 x USB 4.0 on Type-C sockets with Alternate-Mode (factory alternative to 2 x DP++ and 2 x USB 2.0) 4 x USB 3.2 Host ports on Type-A sockets 4 x USB 2.0 Host ports on Quad Type-A sockets
Pci	2x PCI-e x4 Slots Gen4 1x PCI-e x16 Slot Gen4
Audio	On-board HD Audio Codec (Realtek ALC888S) 5.1 Audio Jack with S/PDIF Optical interface Mic In + Line Out internal pin header
Porte seriali	2 x RS-232 / RS-422 / RS-485 ports on internal pin header (from carrier board’s LPC Dual UART controller) 2 x RS-232 ports on dedicated pin header (from module)
Altre interfacce	4 x GPI + 4 x GPO pin header (interface multiplexed with μSD slot) SPI Flash Socket Button / LEDs front panel header 4-pin tachometric FAN connector I2C + SM Bus on feature Pin header I2C Flash Socket SM Bus Smart Battery Connector 4 x 7-segment LCD displays for POST codes LPC/eSPI internal header
Dispositivo di alimentazione	ATX 24 poles connector for carrier board working only Auxiliary 12V connector for carrier board working only 12 VDC power in connector for COM Express module’s working Cabled Coin-cell connector for RTC
Temperatura operativa	0°C ÷ +60°C (Commercial version)
Dimensioni	305x244mm (ATXform factor, 12” x 9.6”)