de
en 
es 
fr 
it 
jp 
ru 
zh 
DEV-KIT-COMe-3.1-T6
Security & Compliance by Design
SECO products integrate security functions that enable out-of-the-box compliance with the RED directive [EN18031-1]. Certification documentation is available upon request. Security monitoring, patching and update automation are powered by Clea.
Secure Boot
Built-in Secure Boot to ensure system integrity from the first startup.
OTA Updates
Remote and secure software update distribution for your devices.
Device Monitoring
Continuous monitoring of device status and activity with Clea.
Secure Operating System
Yocto-based OS integration for customizable and secure system builds.
Certified Security
Compliance with EN18031-1 standards for secure and reliable embedded systems.
Docker Technology
Isolated and flexible application management through containerization.
Beschreibung
|
STARTER KIT CONTENTS The Development Kit contains the following material: COMe-T6-E10 Carrier board GPIO Header adapter cable (Free wires on one extremity) 2x Serial Adapter Cables 1x certified High Speed DP cable 1m DP-to-HDMI adapter DP cable DP cable to HDMI cable 1x SATA cable Front Panel module V995 with connecting cab |
|---|---|
Video Interfaces Description
|
3 x DP++ connectors or 1 x DP++ connector and 2 x USB 4.0 (Factory Alternatives) VGA connector LVDS 24-bit Single/Dual Channel eDP 4-lanes 40 poles VESA connector LVDS External EDID flash socket |
Mass Storage Description
|
4x S-ATA 7p M connectors μSD Card slot (interface multiplexed with GPIO header) |
Networking Description
|
1x GbEthernet RJ-45 connector |
USB Description
|
2 x USB 4.0 on Type-C sockets with Alternate-Mode (factory alternative to 2 x DP++) 4 x USB 3.2 Host ports on Type-A sockets 2 x USB 2.0 Host ports on Quad Type-A sockets |
PCI Description
|
2x PCI-e x4 Slots Gen4 1x PCI-e x16 Slot Gen4 |
Audio Description
|
On-board HD Audio Codec (Realtek ALC888S) Mic In + Line Out internal pin header HD Audio Jacks S/PDIF Out Optical connector |
Serial Ports
|
2 x RS-232 / RS-422 / RS-485 ports on internal pin header (from carrier board’s LPC Dual UART controller) 2 x RS-232 ports on dedicated pin header (from module) |
Other Interfaces
|
4 x GPI + 4 x GPO pin header (interface multiplexed with μSD slot) SPI Flash Socket Button / LEDs front panel header 4-pin tachometric FAN connector I2C + SM Bus on feature Pin header I2C Flash Socket SM Bus Smart Battery Connector 4 x 7-segment LCD displays for POST codes LPC/eSPI internal header FuSa Header JTAG connector LPC internal header USB overcurrent header |
|
Power Supply
|
24 poles ATX connector 8 poles CPU 12V connector 6 poles PCIe Auxiliary 12V connector Coin-cell battery holder for RTC |
Operating Temperature Description
|
0°C ÷ +60°C (Commercial version) |
Dimensions
|
305x244mm (ATXform factor, 12” x 9.6”) |
Teilenummer
Verwandte Produkte
