Carrier-Q7-D59

Carrier Board for Qseven® Rel. 2.0 / 2.1 Compliant Modules in the 3.5” Form Factor. (Formerly CQ7-D59 )

Available in Industrial Temperature Range

Datenblatt

Kontaktieren Sie uns für mehr Informationen und Angebote

Kontakt

Produktbeschreibung

Technische Daten

Beschreibung	Carrier Board for Qseven® Rel. 2.0 / 2.1 Compliant Modules in the 3.5” Form Factor
Videoschnittstellen	LVDS Single/Dual Channel 18-24-bit + HDMI® connector or 2 x eDP connectors + Multimode Display Port
Massenspeicher	1 x SATA connector with HDD Power connector 1 x M.2 Socket 2 2242 Key B SSD Slot microSD Slot on combo microSD + SIM connector
Networking	Up to 2 x Gigabit Ethernet connectors 1 x M.2 Socket 2 2242/3042 Key B Slot for WWAN Modem Modules, connected to on-board miniSIM slot
USB	2 x Superspeed USB 5Gbp Host port on Dual Type-A socket 1 x USB 2.0 Host ports on double Type-A sockets 1 x USB 2.0 Host on internal M.2 Socket 1 x USB 2.0 OTG port on micro-AB socket (USB port shared with USB 2.0 lanes of 1 x USB 3.0)
Audio	Audio interface on internal pin header
Serielle Schnittstellen	4-wire RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector 2 x RS-232 Full-modem serial ports on internal header (need LPC interface from Qseven® module) CAN interface on PCB terminal block
Andere Schnittstellen	SPI internal pin header LPC Bus internal pin header SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header Front Panel Header 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric FAN connector Optional Debug USB port on miniB socket Optional MFG connector for JTAG programming of Qseven® module
Stromversorgung	24VDC ±5% through Micro-fit 2x2 power connector Coin cell battery Holder for CMOS and RTC
Betriebstemperatur	-40°C ÷ +85°C (Industrial temperature range) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Größe	146 x 102 mm (5.75” x 4.02”)

Dokumentation

Data Sheet	[Datasheet] Carrier-Q7-D59 Rel 1.0
Manual	[Manual] CQ7-D59 Rel 1.1
Image	[Picture] CQ7-D59_front [Picture] CQ7-D59_persp

Part Number

Artikel für gruppiertes Produkt
QD59-0001-1121-I2	Beschreibung Teilenummer 3.5” Qseven 2.1 Carrier board for Q7 modules with DP++ & eDP display interfaces, 2x GbE	Kontakt
QD59-0001-2111-I2	Beschreibung Teilenummer 3.5” Qseven 2.1 Carrier board for Q7 modules with HDMI & LVDS interfaces, 2x GbE	Kontakt

Besuchen Sie unseren Shop

Buy and receive SECO products immediately

geh zu dem Laden

Sie haben nicht die Lösung gefunden, nach der Sie gesucht haben?

Das Standardprodukt erfüllt nicht Ihre Anforderungen? SECO bietet Ihnen die Möglichkeit, gemeinsam mit Ihnen eine teilweise oder komplett kundenspezifisch angepasste Hardware- und Softwarelösung zu entwickeln.

Mehr erfahren

Carrier-Q7-D59

Produktbeschreibung

Besuchen Sie unseren Shop

Sie haben nicht die Lösung gefunden, nach der Sie gesucht haben?

Subscribe to newsletter