Carrier-COMe-T6-E10

Carrier Board for COM-Express® Rel. 3.1 Type 6 Modules for Development

Datenblatt

Kontaktieren Sie uns für mehr Informationen und Angebote

Kontakt

CPU

COM Express 3.1 Type 6 Carrier board ATX form factor Especially suited for development and debugging of COM express modules Separated power supply for COM Express module and carrier board

Produktbeschreibung

Technische Daten

Beschreibung	Carrier Board for COM-Express® Rel. 3.1 Type 6 Modules in ATX form factor. Especially suited for development and debugging of COM Epxress® modules. Separated power supply for COM Express® module and carrier board.
Videoschnittstellen	3 x DP++ connectors or 1 x DP++ connector and 2 x USB4.0 Type-C with Alternate-Mode VGA connector LVDS 24-bit Single/Dual Channel eDP 4-lanes 40 poles VESA connector Backlight control + LCD selectable voltages dedicated connector LVDS External EDID flash socket
Massenspeicher	4x S-ATA 7p M connectors μSD Card slot (interface multiplexed with GPIO header)
Networking	1x GbEthernet RJ-45 connector
USB	2 x USB 4.0 on Type-C sockets with Alternate-Mode (factory alternative to 2 x DP++ and 2 x USB 2.0) 4 x USB 3.2 Host ports on Type-A sockets 4 x USB 2.0 Host ports on Quad Type-A sockets
Pci	2x PCI-e x4 Slots Gen4 1x PCI-e x16 Slot Gen4
Audio	On-board HD Audio Codec (Realtek ALC888S) 5.1 Audio Jack with S/PDIF Optical interface Mic In + Line Out internal pin header
Serielle Schnittstellen	2 x RS-232 / RS-422 / RS-485 ports on internal pin header (from carrier board’s LPC Dual UART controller) 2 x RS-232 ports on dedicated pin header (from module)
Andere Schnittstellen	4 x GPI + 4 x GPO pin header (interface multiplexed with μSD slot) SPI Flash Socket Button / LEDs front panel header 4-pin tachometric FAN connector I2C + SM Bus on feature Pin header I2C Flash Socket SM Bus Smart Battery Connector 4 x 7-segment LCD displays for POST codes LPC/eSPI internal header
Stromversorgung	ATX 24 poles connector for carrier board working only Auxiliary 12V connector for carrier board working only 12 VDC power in connector for COM Express module’s working Cabled Coin-cell connector for RTC
Betriebstemperatur	0°C ÷ +60°C (Commercial version)
Größe	305x244mm (ATXform factor, 12” x 9.6”)

Dokumentation

Data Sheet	[Datasheet] Carrier-COMe-T6-E10 Rel 1.0

Sie haben nicht die Lösung gefunden, nach der Sie gesucht haben?

Das Standardprodukt erfüllt nicht Ihre Anforderungen? SECO bietet Ihnen die Möglichkeit, gemeinsam mit Ihnen eine teilweise oder komplett kundenspezifisch angepasste Hardware- und Softwarelösung zu entwickeln.

Mehr erfahren