SECOME-945/N270 [Discontinued]

ETX® Module with Intel® Atom™ N270 and 945GME – ICH7-M DH Express Chipset

Contattaci per maggiori informazioni e per preventivi

Cpu

Intel® Atom™ N270

Grafica

Intel® Graphics Media Accelerator 950

Connettività

10/100Mbps Ethernet port; 4x USB 2.0; ISA Bus; PCI bus

Memoria

2 GB

Descrizione	SECOME-945/N270 is an ETX® module designed by SECO, based on low power consumption Intel® Atom™ CPU and 945GME + ICH7- M DH Express Chipset.
Cpu	Intel® Atom™ N270 1,6GHz with TDP 2.5W
Memoria	up to 2GB of 533/667MHz DDR2 of SO-DIMMs
Grafica	Intel® Graphics Media Accelerator 950
Interfacce video	LVDS, 18 or 24 bit, single or dual channel interface
Risoluzione video	Up to 2048 x 1536 QXGA 75Hz Dual display supported
Rete	10/100Mbps Ethernet port, Realtek RTL8103E
USB	4x USB 2.0 ports
Audio	AC’97 Internal Audio Codec VIA VT1613
Porte seriali	x (TTL level signals)
Altre interfacce	ISA Bus PCI bus PATA, One Ultra ATA/100/66/33 Port SATA, up to 2x S-ATA connectors on ETX® module 1x (optionally, shared with Floppy Disk Drive Port) Watch Dog Timer Real time Clock Temperature, Fan Speed and Voltage Monitoring
Dispositivo di alimentazione	+5VDC (+5VSB needed for ATX mode)
Sistema operativo	Microsoft® Windows® XP (32 bit) Microsoft® Windows® 7 (32 bit) Microsoft® Windows® CE 6.0
Temperatura operativa	-20°C ÷ +70° C *Measured at any point of the heatspreader/heatsink during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensioni	114 x 95 mm (4.5” x 3.7”)