SBC-C23 [Discontinued]

Smart Edge Compute Unit con Processore NXP i.MX 6SoloX

Data sheet

Wiki

Contattaci per maggiori informazioni e per preventivi

Contattaci

Cpu

NXP i.MX6SX SoloX

Grafica

Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator

Connettività

2x Fast Eth; WiFi; BLE; 3x Multicolor Signalling LEDs; 1x RS-232 port; 1x RS-485 port; 2x CAN port

Memoria

32-bit DDR3L memory soldered onboard

Dettagli Prodotto

Informazioni tecniche

Descrizione	SBC-C23 is a Smart Edge Compute Unit, built on NXP i. MX 6SoloX Processor, enables multi core edge computing and networking, while ensuring wide connectivity. As far as memory is concerned, the device features a 32-bit DDR3L memory soldered on-board, up to 1 GB. When it comes to interfaces the board is plentiful: networking interfaces - such as 2x Fast Ethernet RJ-45 ports, Wifi, BT LE combo module with on-board antenna - but also other interfaces like 2x CAN port, 4x analog inputs, I2C, 2x PWM and many others. The device is indeed a multiprotocol bridging for industrial PLCs and smart factory devices. Fields of application include Home Automation, Industrial Internet of Things and Surveillance among the many.
Cpu	NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
Memoria	32-bit DDR3L memory soldered onboard, up to 1GB
Grafica	Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported
Interfacce video	Optional Single Channel 18- / 24- bit LVDS connector w/ Touch Screen (I2C signals) Max resolution 1366x768 @60 Hz, 24bpp
Memoria di massa	8GB eMMC drive on-board μSD Card slot 1MB SPI Flash
Rete	Up to 2x FastEthernet RJ-45 ports Optional Single Band or Dual Band WiFi (802.11 b/g/n) + BT LE combo module with on-board PCB antennas or u/FL connectors, factory alternatives Optional LTE-Cat4 Modem with integrated GNSS, with up to 3 external antennas
USB	1 x USB 2.0 Type-A socket 1 x USB 2.0 OTG on micro-AB connector
Audio	On-board buzzer
Porte seriali	All available on expansion connector: - 1 x RS-232 port - 1x RS-485 port - 2 x CAN port
Altre interfacce	M.2 Socket 1 Key E 2230 (USB + PCI-e x1 interfaces) Slot M.2 Socket 2 Key B 2242 (USB interface) Slot microSIM slot or electronic SIM soldered on-board for the optional Modem and/or the M.2 Key B Slot 3x Multicolor signalling LEDs Reset Button Expansion PCB terminal block with: -4x analog inputs -I2C 2x PWM
Dispositivo di alimentazione	+12VDC DC power jack and 2-poles PCB terminal block for voltage supply Optional Li-Ion Rechargeable battery
Sistema operativo	Wind River Linux
Temperatura operativa	0°C ÷ +60°C (Commercial version) -40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensioni	153 x 89,5 mm (6” x 3,5”)