Santino Vision 7 PM MX6

7.0 inch Panel Mount HMI based on NXP i.MX6 processor. (SANTINO 7.0 BX PCT)

Contattaci per maggiori informazioni e per preventivi

Cpu

NXP i.MX 6 Family

Grafica

GC320 2D accelerator + GC880 3D accelerator

Connettività

1x 100MbE, 2x USB, 2x RS232, RS485, CAN

Memoria

Soldered on Board DDR3L memory

Descrizione	The 7,0 inch human machine interface (HMI) with capacitive touch screen from the SBC-SANTINO-MX6 series is the cost-optimized solution for your industrial project by a precise selection of all components. The fanless industrial PC, on which the system is based, impresses with its simple installation, good performance thanks to the i.MX6 ARM processor and various interfaces such as RS232, RS485. CAN, USB and Ethernet. Please do not hesitate to contact us if you have any questions regarding integration, configuration options or adaptations.
Cpu	NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors: i.MX6S Solo - Single core up to 1 GHz i.MX6DL Dual Lite - Dual core up to 1 GHz per core
Memoria	1 GB 32 bit LPDDR4
Grafica	2D graphics accelerator OpenGL® ES 2.0 3D graphics accelerator with a shader
Risoluzione video	7.0 inch display, resolution 800 x 480, LED lifetime typ. 50k hours typ. 400 cd/m² brightness P-Cap (Projected Capacitive touch screen), with 1.1mm toughened glass cover, colorless
Memoria di massa	eMMC: 4 GB MLC SD slot: 4 bit MMC/SDIO/SD/SDHC
Rete	1x 100MbEthernet
USB	1x USB 2.0 OTG micro-AB 1x USB 2.0 Type-A
Audio	1x speaker (connector), 1 W RMS (8Ω) parallel to internal speaker
Porte seriali	2x RS-232, RS-485
Altre interfacce	9 ÷ 32 VDC
Sistema operativo	Yocto
Temperatura operativa	0°C ÷ +60°C
Dimensioni	206.9 x 126.2 x 35.6 mm

Link	SECO Technical resources Linux Yocto Rocko (legacy) Linux Yocto Jethro (legacy) Linux Yocto Dunfell and newer (legacy) Flash-N-Go (legacy) Android 7.1 (legacy)