DEV-KIT-Q7-2.1

Cross Platform Starter Kit compatible with both x86 and Arm Rel. 2.0 / 2.1 Qseven® modules . (Q7 STARTER KIT 2.1)

Available in Industrial Temperature Range

数据表

联系我们了解更多信息和报价

联系我们

产品详情

技术信息

说明	The Starter Kit contains: • CQ7-D59 (DP or HDMI® version) carrier board for Qseven® Rel. 2.0 / 2.1 compliant modules • HD audio module • I2S audio module • One 24VDC power brick adapter • Cable kit • Adapter for mounting a µQseven® module on standard Qseven® carrier boards (Module not included. Must be purchased separately)
视频界面说明	LVDS Single/Dual Channel 18-24-bit + HDMI® Connector or 2 x eDP connectors + Multimode Display Port
大容量存储器说明	1x SATA connector with HDD power connector 1x M.2 Socket 2 2242 Key B SSD slot microSD Slot on combo microSD + SIM connector
网络说明	2 x Gigabit Ethernet connectors 1 x M.2 Socket 2 2242/3042 Key B Slot for WWAN cellular modem modules, connected to on-board miniSIM slot
USB说明	2x Superspeed USB 5Gbp Host port on dual Type-A socket 1x USB 2.0 Host ports on double Type-A sockets 1x USB 2.0 Host on internal M.2 socket 1 x USB 2.0 OTG port on micro-AB socket (USB port shared with USB 2.0 lanes of 1 x USB 3.0)
音频说明	Audio interface on internal pin header
串行端口	4-wires RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector 2x RS-232 full-modem serial ports on internal header (need LPC interface from Qseven® module) CAN interface on PCB terminal block
其他接口	SPI internal pin header LPC Bus internal pin header 16x GPIO signals on pin header via a GPIO expander controlled via SM Bus or I2C Front panel header 1x 28 pin connector for additional features (I2C, ACPI signals, SMBus, watchdog, thermal management) +12V tachometric FAN connector Optional debug USB port on miniB socket Optional MFG connector for JTAG programming of Qseven® module
电源	24VDC ±5% through Micro-fit 2x2 power connector Coin cell battery holder for powering CMOS and RTC
操作温度说明	-40°C ÷ +85°C (Industrial temperature range) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. The customer must design a product-specific cooling solution for their final system.
尺寸	146 x 102 mm (5.75” x 4.02”)

文件

Data Sheet	[Datasheet] DEV-KIT-Q7-2.1 Rel 1.0

Part Number

组合的产品项目
KTDV-Q7-D59-01.00	部件编号说明 Q7 2.1 Dev Kit with DP++ and eDP display outputs	联系我们
KTDV-Q7-D59-02.00	部件编号说明 Q7 2.1 Dev Kit with HDMI and LVDS display outputs	联系我们