Carrier-Trizeps-pConXS-III

SODIMM 200 Carrier Board for SOM-Trizeps

数据表

Wiki

联系我们了解更多信息和报价

联系我们

连接

i-MOD extension connectors allow additional interfaces to be added easily and cost-effectively

产品详情

技术信息

说明	Multifunctional and compact SODIMM 200 Carrier Board which supports the complete functions of the SOM-Trizeps-VII-MX6 and SOM-Trizeps-VIII-MX8M / SOM-Trizeps-VIII-MX8M-Mini / SOM-Trizeps-VIII-MX8M-Plus
中央处理器说明	Depends on compatible Trizeps SODIMM 200 SOMs • NXP i.MX 6 Quad, Dual, DualLite, Solo, SoloX ARM Cortex A9 up to 1.0 GHz on Trizeps VII SOM • NXP i.MX 8M ARM Cortex A53 up to 1.5 GHz, up to Quad Core, integrated ARM Cortex M4 on Trizeps VIII SOM • NXP i.MX 8M Mini ARM Cortex A53 up to 1.8 GHz, up to Quad Core, integrated ARM Cortex M4 on Trizeps VIII Mini SOM • NXP i.MX 8M Nano ARM Cortex A53 up to 1.5 GHz, up to Quad Core, integrated ARM Cortex M7 on Trizeps VIII Nano SOM • NXP i.MX 8M Plus ARM Cortex A53 up to 1.8 GHz, up to Quad Core, integrated ARM Cortex M7 on Trizeps VIII Plus SOM
视频界面说明	LVDS (KuK Modis Standard), Dual-LVDS, 18 Bit parallel RGB display port, HDMI (with Trizeps VII, Trizeps VIII, Trizeps VIII Plus), capacitive touch, resistive touch
大容量存储器说明	SD card socket
网络说明	Gigabit Ethernet RJ45 connectors Wireless functionalities depend on Trizeps SOM: • Trizeps VII: Onboard WiFi/BT Modul, IEEE 802.11 a/b/g/n/e/i/h/d/k/r/w, +18 dBm, 72 Mbps (20 MHz) and up to 150 Mbps (40 MHz), BT 3.0+ EDR • Trizeps VIII and Trizeps VIII Mini/Plus: Onboard WiFi/BT module, WiFi 2.4GHz/5Ghz, 802.11 a/b/g/n/ac 2x2 MU-MIMO / BT 5.0
USB说明	1x USB 3.0 OTG and 1x USB 2.0 Host via USB A connectors, 3x USB 2.0 Host via internal connectors
Pci Description	Mini PCIe Half-/Full Size card edge connector, combined with nano SIM card slot
音频说明	3.5 mm stereo audio head-phone jack SL2-40 pin header: stereo headphone (16R and 32R), speaker (Mono, 8R), LineIn, microphone,
串行端口	RS232 D-Sub i-MOD FFC connectors: UART SL2-40 pin header: UART
其他接口	Realtime Clock with Backup Cap or battery LED 3-Axis 12-bit/8-bit digital accelerometer digital temperature sensor reset and user tactile switch powerfail detection MIPI camera connector analog BNC / Mini BNC parallel camera interface (optional) 2x CAN via i-MOD FFC connector or SL2-40 pin header i-MOD FFC connectors: I2C, resistive Touch SL2-40 pin header: Power, GPIOs (1x with PWM), SPDIF (out and in), SDIO, I2C, 3x ADC
电源	Industrial +12 up to +24V supply
操作系统	Linux Yocto, Debian / Android / Windows 10 IoT
操作温度说明	-20 ÷ 85°C
尺寸	133.0 x 93.5 x 25.0 mm