Carrier-Q7-A42 [Discontinued]

Qseven® rel. 2.0 Compliant Carrier Board on 3.5” Form factor. (Formerly CQ7-A42)

Available in Industrial Temperature Range

数据表

Wiki

联系我们了解更多信息和报价

联系我们

产品详情

技术信息

说明	The Qseven® Carrier-Q7-A4 is a full featured carrier board for Qseven® Rel. 2.0 compliant CPU modules, in 3.5” form factor. This carrier board can be used with any Qseven® Rel. 2.0 compliant module without incompatibilities and/or loss of functionalities. The board has been specifically designed for taking advantage of all possible features that can be offered by x86 and/or ARM architectures on Qseven® modules. SECOCQ7-3.5 has been developed most of all as a development board to explore the possibilities offered by Qseven® modules, but it could also be a good solution for low volumes production for companies that do not want or need to develop customised carrier board.
视频界面说明	LVDS Dual Channel 24-bit + backlight connectors or 2xeDP Connectors DP++ or HDMI® connector
大容量存储器说明	1 x S-ATA with HDD Power connector 1 x mSATA Slot microSD Slot on combo microSD + SIM connector
网络说明	Up to 2 x Gigabit Ethernet connectors
USB说明	1 x USB 3.0 Host port on Type-A socket 2 x USB 2.0 Host ports on double Type-A sockets 2 x USB 2.0 Host ports on internal pin header 1 x USB 2.0 OTG ports on micro-AB socket (USB Port shared with miniPCI-e slot)
Pci Description	miniPCI-e slot Full/Half size, combined with SIM card slot
音频说明	Audio interface on internal pin header
串行端口	4-wires RS-232/RS-422/RS-485 configurable serial port on DB9 male connector 2 x RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven module) CAN interface on PCB terminal block
其他接口	SPI internal pin header LPC Bus internal pin header SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header Front Panel Header 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric FAN connector Optional Debug USB port on mini-B Socket Optional MFG connector for JTAG programming of Qseven® module
电源	+12VDC Mini-fit Standard ATX power connector Coin cell battery Holder for CMOS and RTC
操作温度说明	-40°C ÷ +85°C (industrial range) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
尺寸	146 x 102 mm (5,75” x 4,02”)

软件

链接	SECO Technical Resources

文件

Data Sheet	[Datasheet] Carrier-Q7-A42 Rel 2.4
Manual	[Schematics] CQ7-A42 Rel 1.2 [Manual] CQ7-A42 Rel 2.0
Image	[Picture] CQ7-A42_front [Picture] CQ7-A42_perspective