Carrier-Trizeps-pConXS-III

SODIMM 200 Carrier Board for SOM-Trizeps

Data sheet

Wiki

Connectivity

i-MOD extension connectors allow additional interfaces to be added easily and cost-effectively

Product details

Technical Info

Description	Multifunctional and compact SODIMM 200 Carrier Board which supports the complete functions of the SOM-Trizeps-VII-MX6 and SOM-Trizeps-VIII-MX8M / SOM-Trizeps-VIII-MX8M-Mini / SOM-Trizeps-VIII-MX8M-Plus
Cpu	Depends on compatible SOM-Trizeps: NXP i.MX 6 Quad, Dual, DualLite, Solo, SoloX Arm® Cortex A9 up to 1.0 GHz on SOM-Trizeps-VII-MX6 NXP i.MX 8M Arm® Cortex A53 up to 1.5 GHz, up to Quad Core, integrated Arm® Cortex M4 on SOM-Trizeps-VIII-MX8M NXP i.MX 8M Mini Arm® Cortex A53 up to 1.8 GHz, up to Quad Core, integrated Arm® Cortex M4 on SOM-Trizeps-VIII-MX8M-Mini NXP i.MX 8M Plus Arm® Cortex A53 up to 1.8 GHz, up to Quad Core, integrated Arm® Cortex M7 on SOM-Trizeps-VIII-MX8M-Plus NXP i.MX 8M Nano Arm® Cortex A53 up to 1.5 GHz, up to Quad Core, integrated Arm® Cortex M7 on Trizeps VIII Nano SOM
Video Interfaces	LVDS (KuK Modis Standard), Dual-LVDS, 18 Bit parallel RGB display port, HDMI (with SOM-Trizeps-VII-MX6, SOM-Trizeps-VIII-MX8M, SOM-Trizeps-VIII-MX8M-Plus), capacitive touch, resistive touch
Mass Storage	SD card socket
Networking	Gigabit Ethernet RJ45 connectors Wireless functionalities depend on SOM-Trizeps : SOM-Trizeps-VII-MX6: onboard WiFi/BT module, IEEE 802.11 a/b/g/n/e/i/h/d/k/r/w, +18 dBm, 72 Mbps (20 MHz) and up to 150 Mbps (40 MHz), BT 3.0+ EDR SOM-Trizeps-VIII-MX8M / SOM-Trizeps-VIII-MX8M-Mini/MX8M-Plus: onboard WiFi/BT module, WiFi 2.4GHz/5Ghz, 802.11 a/b/g/n/ac 2x2 MU-MIMO / BT 5.0
Usb	1x USB 3.0 OTG and 1x USB 2.0 Host via USB A connectors, 3x USB 2.0 Host via internal connectors
Pci	Mini PCIe Half-/Full Size card edge connector, combined with nano SIM card slot
Audio	3.5 mm stereo audio head-phone jack SL2-40 pin header: stereo headphone (16R and 32R), speaker (Mono, 8R), LineIn, microphone,
Serial Ports	RS232 D-Sub i-MOD FFC connectors: UART SL2-40 pin header: UART
Other Interfaces	Realtime Clock with Backup Cap or battery LED Digital temperature sensor Reset and user tactile switch Powerfail detection MIPI camera connector Analog BNC / Mini BNC parallel camera interface (optional) 2x CAN via i-MOD FFC connector or SL2-40 pin header i-MOD FFC connectors: I2C, resistive Touch SL2-40 pin header: Power, GPIOs (1x with PWM), SPDIF (out and in), SDIO, I2C, 3x ADC
Power Supply	Industrial +12 up to +24V supply
Operating System	Depends on compatible SOM-Trizeps: Linux Yocto, Debian Android Windows 10 IoT
Operating Temperature	-20 ÷ 85°C
Dimensions	133.0 x 93.5 x 25.0 mm