SBC-SANTINO-MX6

Single Board Computer (SBC) based on NXP i.MX6 processor (Formerly SANTINO Core)

Contattaci per maggiori informazioni e per preventivi

Cpu

NXP i.MX 6

Grafica

GC320 2D Beschleuniger + GC880 3D Beschleuniger

Connettività

1x 100MbE, 2x USB, 2x RS232, RS485, CAN

Memoria

Soldered on Board DDR3L memory

Descrizione	The optimized single board computer (SBC) for your project from 5.7 to 10.4 inches. Based on the i.MX6 single or dual core lite ARM processor and many industrial interfaces, as well as USB and Ethernet, this embedded board is the best choice for many projects. For a touch display SANTINO provides a TTL and I²C interface and the wide range voltage input as well as the installed Linux operating system make this board ready-to-use. Based on this SBC we offer many human machine interfaces off-the-shelf, for configuration options and adaptations please contact us
Cpu	NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors: i.MX6S Solo - Single core up to 1 GHz i.MX6DL Dual Lite - Dual core up to 1 GHz per core
Memoria	1 GB 32 bit LPDDR4
Grafica	2D-Grafikbeschleuniger OpenGL® ES 2.0 3D-Grafikbeschleuniger mit einem Shader
Interfacce video	18-bit parallel RGB interface
Risoluzione video	bis zu 1024 x 600, 18bpp
Memoria di massa	eMMC: 4 GB MLC micro SD slot: 4 bit MMC/SDIO/SD/SDHC
Rete	1x 100MbEthernet
USB	1x USB 2.0 OTG micro-AB 1x USB 2.0 Type-A
Audio	1x speaker (connector), 1 W RMS (8Ω) parallel to internal speaker
Porte seriali	2x RS-232, RS-485
Dispositivo di alimentazione	9 ÷ 32 VDC
Sistema operativo	Yocto
Temperatura operativa	0°C ÷ +60°C
Dimensioni	138.0 x 18.0 x 80.0 mm

Link	Linux Yocto Jethro Linux Yocto Rocko Linux Yocto Dunfell and newer Flash-N-Go Android 7.1

Data Sheet	[Datasheet] SBC-SANTINO-MX6 Rel 1.1
Manual	[Manual] SANTINO core by Garz & Fricke Rev.4

Elementi prodotti raggruppati
4GH900-3827RA-01P	Descrizione Part Number SANTINO x2l 7.0 OF PCT V1.0	Contattaci
4GH900-3889RA-01P	Descrizione Part Number SANTINO x2l 7.0 BX PCT V1.0	Contattaci