SOM-SMARC-MX95

SMARC® Rel. 2.1.1 module with NXP i.MX 95 Applications Processors

Available in Industrial Temperature Range

Data sheet

Cpu

NXP i.MX 95: 6x Cortex-A55 @2GHz ,1x M33 core @333MHz, 1x M7 core @800MHz

Graphics

2D/3D GPU and NPU ML accelerator up to 2.0 TOP/s

Connectivity

2x GbE, optional Wi-Fi + BT/BLE module, support for 3rd 10Gps interface

Memory

Up to 16GB LPDDR5

Product details

Technical Info

Description	SMARC® Rel. 2.1.1 Computer on Module with NXP i.MX 95 Applications Processors, delivering optimized processing and advanced Machine Learning acceleration for next-generation edge computing applications.
Cpu	NXP i.MX95 Applications Processors 6x Arm® Cortex™-A55 @2GHz Arm® Cortex™-M33 @333Mhz Arm® Cortex®-M7 @800Mhz NPU: 2.0 TOP/s Neural Network performance, up to 1.0 GHz
Memory	Up to 16GB LPDDR5 6.4GT/s (32-bit)
Graphics	GPU Arm Mali-G310 V2 with 2D/3D acceleration
Video Interfaces	2x LVDS single channel / 1xLVDS dual channel Optional HDMI® interface 1x 4-lanes CSI camera interface Optional 1x 2-lanes CSI camera interface (alternative to HDMI® interface)
Video Resolution	LVDS, HDMI®: up to 1080p @60Hz
Mass Storage	Up to 128GB eMMC 5.1 drive soldered on-board (boot device) SD 4-bit interface (boot device)
Networking	Up to 2x Gigabit Ethernet interfaces Optional Wi-Fi (802.11a/b/g/n/ac/ax) + BT/BLE 5.3 module soldered on-board SERDES (XGMII) interface for additional third Ethernet interface, up to 10Gbps supported
Usb	Up to 5x USB 2.0 host ports 1x USB SuperSpeed 5Gbps port Up to 1x USB 2.0 OTG port
Pci	Up to 2x PCI-e x1 Gen3 ports
Audio	1x I2S audio interface
Serial Ports	2x UART (4-wires) 2x UART (2-wires)
Other Interfaces	2x general purpose PWM FAN Management Signals Up to 12x GPIOs 1x general purpose I2C bus 1x power management I2C bus 1x general purpose SPI interface 1x QuadSPI interface or additional general purpose SPI interface Watchdog Boot select signals Power management signals JTAG Header Optional TPM 2.0 soldered on-board
Power Supply	+5VDC ± 5% and +3.3V_RTC
Operating System	Linux Yocto
Operating Temperature	0 ÷ +60°C (Commercial Range) -40 ÷ +85°C (Industrial Range) Measured at any point of SECO standard heatspreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	82 x 50 mm