SBC-A62-MX6 [Discontinued]

SBC with NXP i.MX 6 Processor. (DORIS - A62)

Data sheet

Wiki

Cpu

Single-, Dual- and Quad- Core (ARM® Cortex® A9 Cores)

Graphics

2D/3D dedicated graphics processors

Connectivity

Wi-Fi add-on module; up 28 GPI/Os; CAN Bus

Memory

Up to 2GB DDR3L on-board

Product details

Technical Info

Description	Low-end Single Board Computer with NXP i.MX 6 Processor, that exploits the potential of a configurable expansion connector, to fully meet the configuration flexibility needs. Thanks to its features, this Single Board with the i.MX6 is ideal for applications in digital signage, infotainment and in all general purpose contexts requiring multimedia capabilities, high performance and high levels of parallel computing for the reproduction of relevant and/or engaging contents.
Cpu	NXP i.MX 6 Family, based on ARM Cortex-A9 processors: SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz
Max Cores	4
Memory	Soldered on-board DDR3L memory*: SBC-A62-J-SOLO: 512MB 32-bit interface SBC-A62-J-LITE: 1GB 64-bit interface SBC-A62-J-PLUS: 2GB 64-bit interface SBC-A62-J-QUAD: 1GB 64-bit interface * For additional configurability please contact SECO
Graphics	Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD) HW encoding of MPEG-4, H.263 V2, H.264, MJPEG HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays
Video Interfaces	1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface HDMI® interface 1.4
Video Resolution	HDMI®: up to 1920 x 1080p LVDS: up to 1920 x 1200
Mass Storage	4GB eMMC drive soldered onboard* microSD Card slot SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector * For additional configurability please contact SECO
Networking	Gigabit Ethernet connector Internal USB connector for Wi-Fi Module
Usb	2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector USB micro-B Client port
Audio	SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks
Serial Ports	Debug UART interface, TTL voltage level. SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V) Other serial interfaces on the expansion connector: SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level); SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level); SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)
Other Interfaces	Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector; Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs * Please note that some of these interfaces are factory options, other configurations are made via SW.
Power Supply	+12VDC; Additional embedded Low Power RTC; SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included) SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery
Operating System	Free Android and Linux community BSP available at UDOO.org SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us Yocto Guideline valid for SECO BSP Linux
Operating Temperature	0°C ÷ +60 °C (commercial temp.) For industrial temp. (-40°C ÷ +85°C) please contact us *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	110 x 86.5 mm (4.5” x 3.7”)

Software

Link	SECO Technical Resources

Documentation

Data Sheet	[Datasheet] SBC-MX6 Rel 4.4 [Reference Schematics] DORIS
Manual	[Manual] DORIS Rel 2.3
Image	[Picture] DORIS_front

Part Number

Grouped product items
SYS-A62-LITE-CSCA	Part Number Description SBC-A62-J, LITE version (i.MX6DL,1GB RAM, 4GB eMMC) w/ small Heatsink, Comm. Temp	Contact us
SYS-A62-LITE-ILCA	Part Number Description SBC-A62-J System, LITE version (CPU 800MHz i.MX6 DualLIte) w/Large Heatsink, industrial temperature	Contact us
SYS-A62-LITE-ISCA	Part Number Description SBC-A62-J System, LITE version (CPU 800MHz i.MX6 DualLIte) w/Small Heatsink, industrial temperature	Contact us
SYS-A62-QUAD-CLCA	Part Number Description SBC-A62-J, QUAD version (i.MX6Q,1GB RAM, 4GB eMMC) w/ large Heatsink, Comm. Temp	Contact us
SYS-A62-QUAD-ILCA	Part Number Description SBC-A62-J, QUAD version (i.MX6Q,1GB RAM, 4GB eMMC) w/ large Heatsink, Ind. Temp	Contact us
SYS-A62-QUAD_2-ILCA	Part Number Description SBC-A62-J System, QUAD version (CPU 800MHz i.MX6Q Quad) w/ 2GB RAM, Large Heatsink, industrial temperature	Contact us
SYS-A62-SOLO-CSCA	Part Number Description SBC-A62-J, SOLO version (i.MX6S,512MB RAM, 4GB eMMC) w/ small Heatsink, Comm. Temp	Contact us
SYS-A62-SOLO-ISCA	Part Number Description SBC-A62-J System, SOLO version (CPU 800MHz i.MX6 Solo) w/Small Heatsink, industrial temperature	Contact us