Home
SBC-3.5-MX8

Skip to the beginning of the images gallery

SBC-3.5-MX8

3.5" SBC with NXP i.MX8 Applications Processors. (THEMIS - C43)

Available in Industrial Temperature Range

Data sheet

Wiki

Cpu

NXP i.MX 8 Family

Graphics

2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit/XVSX (QuadMax and QuadPlus)

Connectivity

2x Gigabit Ethernet interfaces

Memory

Soldered down LPDDR4

Product details

Technical Info

Description	3.5" SBC Industrial ARM solution for IoT edge computing applications
Cpu	NXP i.MX 8 Family: i.MX 8QuadMax: 2x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F i.MX 8QuadPlus: 1x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F
Max Cores	8
Memory	Soldered down LPDDR4 memory, 64-bit interface, 1600MHz. Base configuration 2GB, up-scalable to 4GB, 6GB, 8GB
Graphics	2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit / XVSX (QuadMax and QuadPlus) 1x embedded VPU, supporting H.265 (4K30) and H.264 (1080p60) decoding and H.264 (1080p30) encoding Supports 3 independent video outputs (total combined resolution 4K)
Video Interfaces	OUTPUTS: HDMI® output (Micro) Optional eDP 1.4 interface Optional Single/Dual-Channel 18-/24- bit LVDS interface INPUTS: HDMI® input 2x 4-lanes MIPI-CSI Camera interfaces
Video Resolution	HDMI®: Up to UltraHD (4K) LVDS, eDP: up to 1080p
Mass Storage	eMMC 5.1 Drive soldered on-board, up to 64GB 1x S-ATA interface available on M.2 Socket 2 Key B Slot (interface shared with PCI-e x1) microSD Card Slot 4MB QuadSPI Flash NAND (boot device only)
Networking	2x Gigabit Ethernet interfaces Combo WiFi 802.11 a/b/g/n/ac + BT LE 4.2 module with ceramic SMT antennas on-board M.2 Socket 2 Key B Slot for M.2 Modems M.2 Socket1 Key E Slot for WiFi + BT external modules
Usb	1 x USB 3.0 Host port on Type-A socket 1x USB 2.0 OTG port on micro-AB socket 1x USB 2.0 Host port on external Type-A socket 1x USB 2.0 Host port on internal connector 2 x USB 2.0 ports available on M.2 Key B and Key E slots
Audio	I2S Audio Codec HP + MIC interfaces, available on a single combo TRRS connector
Serial Ports	1x UART TTL 1x RS-232 / UART TTL configurable 1x RS-485 / RS-422 / UART TTL configurable 3x CAN interfaces
Other Interfaces	4x Analog Inputs 6x GPIOs SPI interface I2C interface Embedded additional RTC circuitry for lowest power consumption SIM dedicated slot
Power Supply	+12VDC ± 10%
Operating System	Wind River Linux Yocto Android
Operating Temperature	0°C ÷ +60°C (Commercial version) -40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	146 x 102 mm (5,75” x 4,02”)

Software

Link	SECO Technical Resources

Documentation

Data Sheet	[Datasheet] SBC-3.5-MX8 Rel 1.3
Manual	[Manual] SBC-3.5-MX8 Rel 1.0 (only for Rev A/Rev B) [Manual] SBC-3.5-MX8 Rel 2.2 (only for Rev C/Rev D)
Image	[Picture] SBC-3.5-MX8_front [Picture] SBC-3.5-MX8_back scont

Part Number

Grouped product items
SC43-3341-1211-I2	Part Number Description SBC-C43 w/i.MX8QuadMax @1.6GHz, 8GB LPDDR4, 32GB eMMC, LVDS(12V,3.3V)+eDP(12V,3.3V)+HDMI, CSI, HDMI in, GbE+USB3.0 conn, GbE+USB2.0 conn, M.2 KeyE, M.2 Key B, 3x CAN, 1x RS-232, 1x RS-422/485, 4xAnalog In, Ind. Temp.	Contact us

Visit our Shop

Buy and receive SECO products immediately.

Go to Shop

Didn't find the solution you were looking for?

Does the standard product not meet your needs? SECO can sit down with you to develop a partially or fully-customized hardware and software solution.

Find out more

SBC-3.5-MX8

Product details

Visit our Shop

Didn't find the solution you were looking for?

Subscribe to newsletter