Carrier-SMARC-E71

Carrier board for SMARC 2.1.1 modules in a 3.5” form factor

Data sheet

Product details

Technical Info

Description	Carrier board for SMARC 2.1.1 modules in a 3.5” form factor
Video Interfaces	1x HDMI® output 1x DisplayPort (option, via dual stack with HDMI®) 1x dual LVDS or eDP (option) 1x MIPI-CSI2 4-lane 1x MIPI-CSI2 2-lane
Mass Storage	SSD M.2 2242 2280 Key B via 1x SATA/2-lane PCIe (option) 1x SPI flash Micro-SD card (option)
Networking	2x RJ-45 Gigabit Ethernet connectors (via dual stack connector) 1x M.2 2230 Key E for Wi-Fi/BT 1x mPCIe half-size or full-size (cellular modem capable) 1x uSIM slot selectable for connection to mPCIe or M.2 Key B slot (option)
Usb	2x USB 3.0 Type A (via dual stack connector) 1x USB 2.0 Type A connector 1x USB OTG micro-AB connector
Audio	Texas Instruments TLV320AIC3204 audio codec TRRS jack (stereo output, mono mic input) I2S/HDA header
Serial Ports	1x serial header with: • 1x RS-232 / RS-422 / RS-485 • 1x RS-232 (option with UART) 1x UART (TX/RX signals only) on header (intended for debug)
Other Interfaces	1x expansion header with: • 1x I2C bus • 1x SPI bus • 1x UART (option with RS-232) 1x header with 8x GPIOs 1x external power output header providing 5V @ 1A and 3.3V @ 1A Boot mode selection switches 1x CR1220 coin cell socket for real time clock voltage 1x power button 1x reset button 1x front panel signal header (fan, 2x LED, power button out, reset button out)
Power Supply	9–24VDC input (Molex 0768290102 connector)
Operating Temperature	0°C to +70°C
Dimensions	147mm X 101.6mm (3.5” form factor)
Norms & Standards	CE, FCC, RoHS, SMARC 2.1.1