SANTOKA 7.0 SG IPS

7.0 inch Flush Mount HMI based on NXP i.MX6 processor

Спецификация

Свяжитесь с нами для получения более подробной информации и ценовых предложений

Связаться с нами

Центральные процессоры

NXP i.MX 6 Family

Графика

GC320 & GC355 2D accelerator + GC2000 3D accelerator

Связность

2x 100MbE, up to 3x USB, 2x RS232, RS485, CAN

Память

Soldered on Board DDR3L memory

Информация о продукте

Техническая информация

Описание	This Flush Mount control unit with a 7,0 inch capacitive touch display, which can be seamlessly integrated into the device surface, offers you great flexibility thanks to its viewing angle independence. Whether in portrait or landscape mode, this Human Machine Interface is a good choice. The Single Board Computer of the SANTOKA series opens up the world of IOT to your product. The integrated threads make the HMI particularly easy to install in your device and the integrated seal offers a high degree of protection. The well thought-out design of our Flush Mount devices, based on many years of experience, offers many possibilities for individualization. Please contact us for more information.
Центрального процессора	NXP i.MX 6 Family based on ARM® Cortex®-A9 cores : i.MX 6 Quad Plus – Full featured, 4x Cortex®-A9 cores up to 1.0GHz i.MX 6 Quad – Full featured, 4x Cortex®-A9 cores up to 1.0GHz i.MX 6 Dual – Full featured, 4x Cortex®-A9 cores up to 1.0GHz i.MX 6 Single – Full featured, 4x Cortex®-A9 cores up to 1.0GHz
Память	1 GB 64 bit DDR3L
Rрафики	Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D OpenVG™ accelerator HW encoding of MPEG-4, H.263 V2, H.264, MJPEG HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
Bидеоинтерфейсов	HDMI interface
Bидеоразрешения	7.0 inch display, resolution 800 x 480, LED lifetime typ. 30k hours typ. 360 cd/m² brightness P-Cap (Projected Capacitive touch screen), with 3.0mm toughened glass cover, RAL 9005
Hакопителя	eMMC: 4 GB MLC SD slot: 4 bit MMC/SDIO/SD/SDHC
Cети	2x 100MbEthernet mPCIe (half size) socket for modems or Wifi/BT
Usb	1x USB 2.0 OTG micro-AB up to 2x USB 2.0 Type-A
Aудио	1x speaker (connector), 1 W RMS (8Ω) parallel to internal speaker
Последовательные порты	2x RS-232, RS-485
Блок питания	9 ÷ 32 VDC
Операционная система	Yocto
Pабочей температуры	0°C ÷ +60°C
Размеры	197.0 x 128.0 x 35.9 mm

Программное обеспечение

Ссылка	Android 7.1 Flash-N-Go Linux Yocto Rocko Linux Yocto Jethro Linux Yocto Dunfell and newer

документация

Manual	[Manual] SANTOKA 7.0 SG IPS by Garz & Fricke Rev 5
Data Sheet	[Datasheet] SANTOKA 7.0 SG

Не нашли решение, которое искали?

Стандартный продукт не отвечает вашим потребностям? Компания SECO может вместе с вами разработать частично или полностью кастомизированное аппаратное и программное решение.

Узнать больше