SBC-pITX-EHL
Datos del producto
Descripción | SBC Pico-ITX con SoCs Intel® Atom® Serie X6000E, Intel® Pentium® y Celeron® Serie N y J (antes Elkhart Lake) |
---|---|
Cpu |
(*) IHS: Integrated heat spreader; TCC: Time Coordinated Computing |
Memoria | Soldered down LPDDR4-3200 memory, up to 16GB with IBECC supported only with Atom™ industrial SoCs Speed: 4267MT/s single rank (1GB / 2GB / 4GB / 8GB), 3733MT/s dual rank (16GB) |
Gráfica | Up to 3 independent displays Integrated Intel® Gen11 UHD Graphics controller with up to 32 EU 4K HW decoding and encoding of HEVC (H.265), H.264, VP8, VP9, WMV9/VC1 (decoding only) |
Interfaces vídeos | 2x Multimode DisplayPort 1.4, on Dual DP++ Connector 1x eDP 1.3 or Single/Dual-Channel 18-/24-bit LVDS interface |
Resolución vídeo | Up to 4096x2160 @60Hz |
Almacenamiento en masa | Optional eMMC 5.1 drive soldered on-board M.2 SATA SSD slot (Socket 2 Key B Type 2242/3042).** 1x SATA Gen3 7 pins M connector
** SATA SSD and WWAN functionalities share the same slot and are therefore mutually exclusive. |
Trabajo en red | 2x Gigabit Ethernet PHY with precision clock synchronization and synchronous Ethernet clock output for IEEE 1588 M.2 WWAN Slot for Modems (Socket 2 Key B Type 2242/3042) coupled to on-board Nano SIM slot. ** M.2 WLAN Connectivity Slot for Wi-Fi/BT (Socket 1 Key E Type 2230)
** SATA SSD and WWAN functionalities share the same slot and are therefore mutually exclusive. |
Usb | Dual SuperSpeed USB 10Gbps Standard-A connector Dual USB 2.0 pin header |
Audio | HD Audio codec / Cirrus Logic CS4207 Mic In, Line Out and S/PDIF Out, on pin header |
Puertos de serie | 2x RS-232/RS-422/RS-485 UARTs (software configurable) on pin header |
Otras interfaces | 8x GPIOs, I2C, SPI connectors 2x CAN connector Fan connector RST_BTN#, PWR_BTN# and activity LED signals on pin header Optional TPM 2.0 on-board |
Alimentación eléctrica | +12VDC Cabled coin cell battery for RTC |
Sistema operativo | Microsoft® Windows 10 IoT Enterprise Linux Yocto |
Temperatura de funcionamiento | 0°C - +60°C (Commercial version) * -40°C - +85°C (Industrial version) * * Measured at any point of SECO standard heatspreader for this product, during any and all times (including start-up). Actual temperature will depend on the application, enclosure, and/or environment. Each customer must consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated. |
Dimensiones | 100 x 72 mm (3,93” x 2,83”) |
SD63-1421-2321-C2 | Descripción número de pieza SBC-pITX-EHL w/ Intel Celeron J6413 (QC @ 1.3GHz - up to 3.0 GHz, TDP 10W), 4GB RAM, 32GB eMMC, horizontal power input minifit connector, TPM 2.0, Audio HDA, 3.3V LCD supply voltage, LVDS – Comm Temp. | |
SD63-A641-1321-I2 | Descripción número de pieza SBC-pITX-EHL w/ Intel Atom® x6425RE (QC @1.9GHz, TDP 12W) w/IBECC 16GB RAM, 64GB eMMC, vertical power input minifit connector, T | |
SD63-9521-1121-I2 | Descripción número de pieza SBC-pITX-EHL w/ Intel Atom® x6414RE (QC @1.5GHz, TDP 9W) w/IBECC 8GB RAM, 32GB eMMC, vertical power input minifit connector, TP | |
SD63-8421-1111-I2 | Descripción número de pieza SBC-pITX-EHL w/ Intel Atom® x6212RE (DC @1.20 GHz, TDP 6W) w/ IBECC 4GB RAM, 32GB eMMC, vertical MiniFit Power Connector, TPM 2. | |
SD63-7641-1322-I2 | Descripción número de pieza SBC-pITX-EHL w/ Intel Atom® x6425E (QC 2.0 GHz - up to 3.00 GHz, TDP 12W) w/IBECC 16GB RAM, 64GB eMMC, vertical power input minifit connector, TPM 2.0, w/HDA, 3.3V LCD supply voltage, eDP – Ind. Temp. Range | |
SD63-6521-1121-I2 | Descripción número de pieza SBC-pITX-EHL w/ Intel Atom® x6413E (QC 1.5GHz - up to 3.00 GHz, TDP 9W) w/IBECC 8GB RAM, 32GB eMMC, vertical power input minifit | |
SD63-5421-1111-I2 | Descripción número de pieza SBC-pITX-EHL w/ Intel® Atom® X6211E (DC @ 1.3GHz up to 3.0 GHz, TDP 6W) w/ IBECC 4GB RAM, 32GB eMMC, vertical MiniFit Power Connector, TPM 2.0 w/o Audio, 5V LCD supply voltage, LVDS, Ind. Temp. Range |
¿No encontró la solución que buscaba?
¿El producto estándar no satisface sus necesidades? SECO puede colaborar para desarrollar juntos una solución de software y un hardware personalizado total o parcialmente.
Para saber más