|Description||With dual independent display support, the COM-Express® Type 6 Computer on Module (CoM) with the Intel® Atom™ E3800 and Celeron® families offers broad connectivity options (HDMI, DVI, DP, DP++, LVDS, CRT), and it is also available in an Industrial temperature range and features an optional eMMC disk soldered onboard. SOM-COMe-CT6-BT offers compatibility with all COM Express Type 6 compliant carrier boards.|
Intel® Atom™ E3845, Quad Core @ 1.91GHz, 2MB Cache, 10W TDP
DDR3L non-ECC SO-DIMM slots, 4GB modules supported per each slot
Integrated Intel® HD Graphics 4000 series controller Dual independent display support
1 x Digital Display Interface (DDI) able to drive HDMI / DVI / DP++ interface
CRT Interface: Up to 2560x1600@60Hz
Optional eMMC drive soldered on board
Optional Gigabit Ethernet interface (uses one PCI-e lane)
7 x USB 2.0 Host ports
Up to 4 x PCI-e x1 Gen2 lanes
HD Audio Interface
2 x Serial port (TX/RX only, TTL interface)
2 x Express Card interfaces
+12VDC ± 10% and + 5VSB (optional)
Microsoft® Windows 7 (32/64 bit)
0°C ÷ +60°C (commercial version)
*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
|Dimensions||95 x 95 mm (3.74” x 3.74”)|
Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.
Didn't find the solution you were looking for?
Does the standard product not meet your needs? SECO can sit down with you to develop a partially or fully-customized hardware and software solution.Find out more