SECOME-945/N270 [Discontinued]

ETX® Module with Intel® Atom™ N270 and 945GME – ICH7-M DH Express Chipset

Cpu

Intel® Atom™ N270

Graphics

Intel® Graphics Media Accelerator 950

Connectivity

10/100Mbps Ethernet port; 4x USB 2.0; ISA Bus; PCI bus

Memory

2 GB

Description	SECOME-945/N270 is an ETX® module designed by SECO, based on low power consumption Intel® Atom™ CPU and 945GME + ICH7- M DH Express Chipset.
Cpu	Intel® Atom™ N270 1,6GHz with TDP 2.5W
Memory	up to 2GB of 533/667MHz DDR2 of SO-DIMMs
Graphics	Intel® Graphics Media Accelerator 950
Video Interfaces	LVDS, 18 or 24 bit, single or dual channel interface
Video Resolution	Up to 2048 x 1536 QXGA 75Hz Dual display supported
Networking	10/100Mbps Ethernet port, Realtek RTL8103E
Usb	4x USB 2.0 ports
Audio	AC’97 Internal Audio Codec VIA VT1613
Serial Ports	2x (TTL level signals)
Other Interfaces	ISA Bus PCI bus PATA, One Ultra ATA/100/66/33 Port SATA, up to 2x S-ATA connectors on ETX® module 1x (optionally, shared with Floppy Disk Drive Port) Watch Dog Timer Real time Clock Temperature, Fan Speed and Voltage Monitoring
Power Supply	+5VDC (+5VSB needed for ATX mode)
Operating System	Microsoft® Windows® XP (32 bit) Microsoft® Windows® 7 (32 bit) Microsoft® Windows® CE 6.0
Operating Temperature	-20°C ÷ +70° C *Measured at any point of the heatspreader/heatsink during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensions	114 x 95 mm (4.5” x 3.7”)