B901 [Discontinued]

The boxed solution B901 supports the CQ7-901 carrier board on Pico-ITX Form Factor and the following module: • Q7-928

Cpu

supports Qseven® standard module with NXP i.MX6 Processor Q7-928

Graphics

2D/3D dedicated graphics processors (Q7-928)

Connectivity

1 x Gigabit / FastEthernet connector 1 x optional additional FastEthernet port

Memory

up to 4GB DDR3L on-board (Q7-928)

Description	The LYNX (formerly codenamed B901) is composed by: • Upper and lower Housing case • Front and back panel (both for dual USB and for Dual Ethernet versions) • Screws kits • Assembly blocks for: - Q7-928 • Assembly manual AVAILABLE FOR: Q7-928 CQ/-901
Video Interfaces	LVDS Interface, 34 pin 2mm pin header Backlight Connector, 6 pin, 2mm Pin Header HDMI Connector
Mass Storage	1 x SATA connector μSD Card Slot
Usb	Up to 7 x USB 1.1 / 2.0 ports (1 x USB client)
Pci	1 x miniPCI Express slot
Audio	AC’97 and HD Audio Codec, jumper selectable Line In, Mic In on internal pin headers Earphone pin header available only on Industrial version
Serial Ports	1 x RS-232 (RS-422 / RS-485 configurable) 1 x TTL-level serial port CAN Interface
Other Interfaces	8 x GPIO on 10-Pin Header Connector 4-Wire Touch Screen controller integrated SM Bus Pin Header I2C Bus, SPI interface SIM Card slot for miniPCI Express modems Internal Pin Header for Power, Lid, Sleep and Reset Button
Power Supply	On-board rechargeable Lithium Battery for CMOS Backup and RTC 12V Power jack Power On Status LED
Operating Temperature	0°C ÷ +60°C (Commercial version) -40°C ÷ +85°C (Industrial version)
Dimensions	100 x 72 mm (3.94” x 2.83”)