SBC-eNUC-BSW [Discontinued]




Product details
![]() |
SBC-eNUC-BSW is SECO’s Single Board Computer based on the Intel® Pentium® and Celeron® N3000 series, in the embedded NUC™ (eNUC) form factor from the SGeT consortium. This embedded NUC™ Type 2 “Connectivity” module (101.6 x 101.6 mm) is a multifunctional and long lifetime solution that features Industrial range power supply, HDMI, miniDP and eDP video connectors, M.2 SSD and M.2 PCI-e slots, along with Dual Gigabit Ethernet and USB 3.0 Connectivity. A smart, innovative, cost-effective and aimed at next generation Single Board Computer. |
---|---|
![]() |
Intel® Pentium® N3710, Quad Core @ 1.6GHz (Turbo Boost 2.56GHz), 2MB Cache, 6W TDP |
![]() |
4 |
![]() |
2 x DDR3L SO-DIMM Slots with Dual Channel Support, |
![]() |
Integrated Graphics |
![]() |
HDMI connector |
![]() |
HDMI, DP: up to 3840x2160 24bpp @ 30Hz, 2560x1600 24bpp @ 60Hz |
![]() |
Optional eMMC drive on-board |
![]() |
2 x Gigabit Ethernet ports |
![]() |
2 x USB 3.0 Host ports on Type-A sockets |
![]() |
1 x PCI-e x1 port on M.2 Connectivity Slot |
![]() |
Audio available on HDMI and miniDP++ interfaces |
![]() |
2 x RS-232 / RS-422 / RS-485 UARTS, on internal Pin Header |
![]() |
I2C Touch Panel connector |
![]() |
+18VDC ÷ +32VDC recommended |
![]() |
Microsoft® Windows 7 (32 / 64 bit) |
![]() |
0°C ÷ +60 °C (commercial version)
*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated. |
![]() |
101.6 x 101.6 mm (4” x 4”) |

Didn't find the solution you were looking for?
Does the standard product not meet your needs? SECO can sit down with you to develop a partially or fully-customized hardware and software solution.
Find out more