SBC-C23 [Discontinued]

Smart Edge Compute Unit with NXP i.MX 6SoloX Processor

Data sheet

Wiki

Cpu

NXP i.MX6SX SoloX

Graphics

Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator

Connectivity

2x Fast Eth; WiFi; BLE; 3x Multicolor Signalling LEDs; 1x RS-232 port; 1x RS-485 port; 2x CAN port

Memory

32-bit DDR3L memory soldered onboard

Product details

Technical Info

Description	SBC-C23is a Smart Edge Compute Unit, built on NXP i. MX 6SoloX Processor, enables multi core edge computing and networking, while ensuring wide connectivity. As far as memory is concerned, the device features a 32-bit DDR3L memory soldered on-board, up to 1 GB. When it comes to interfaces the board is plentiful: networking interfaces - such as 2x Fast Ethernet RJ-45 ports, Wifi, BT LE combo module with on-board antenna - but also other interfaces like 2x CAN port, 4x analog inputs, I2C, 2x PWM and many others. The device is indeed a multiprotocol bridging for industrial PLCs and smart factory devices. Fields of application include Home Automation, Industrial Internet of Things and Surveillance among the many.
Cpu	NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
Memory	32-bit DDR3L memory soldered onboard, up to 1GB
Graphics	Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported
Video Interfaces	Optional Single Channel 18- / 24- bit LVDS connector w/ Touch Screen (I2C signals) Max resolution 1366x768 @60 Hz, 24bpp
Mass Storage	8GB eMMC drive on-board μSD Card slot 1MB SPI Flash
Networking	Up to 2x FastEthernet RJ-45 ports Optional Single Band or Dual Band WiFi (802.11 b/g/n) + BT LE combo module with on-board PCB antennas or u/FL connectors, factory alternatives Optional LTE-Cat4 Modem with integrated GNSS, with up to 3 external antennas
Usb	1 x USB 2.0 Type-A socket 1 x USB 2.0 OTG on micro-AB connector
Audio	On-board buzzer
Serial Ports	All available on expansion connector: - 1 x RS-232 port - 1x RS-485 port - 2 x CAN port
Other Interfaces	M.2 Socket 1 Key E 2230 (USB + PCI-e x1 interfaces) Slot M.2 Socket 2 Key B 2242 (USB interface) Slot microSIM slot or electronic SIM soldered on-board for the optional Modem and/or the M.2 Key B Slot 3x Multicolor signalling LEDs Reset Button Expansion PCB terminal block with: -4x analog inputs -I2C 2x PWM
Power Supply	+12VDC DC power jack and 2-poles PCB terminal block for voltage supply Optional Li-Ion Rechargeable battery
Operating System	Wind River Linux
Operating Temperature	0°C ÷ +60°C (Commercial version) -40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	153 x 89,5 mm (6” x 3,5”)