Q7 DEV KIT 2.0

Cross Platform Development Kit for Qseven® philosophy, compatible with both x86 and Arm Rev. 2.0 Qseven® modules

Data sheet

Product details

Technical Info

Description	The new Cross Platform Development Kit 2.0 is based on the CQ7-A30 carrier board, born from the SGeT Consortium specifications. The Kit is a complete package that contains all the necessary materials to start developing with Qseven® CPU modules, both x86 and Arm architectures, and most importantly to explore the possibilities offered by these two different worlds. This thanks to the possibility of swapping, at any given moment, from one architecture to the other, with only a few minor software changes, and with minimal effort and time-consumption. DEVELOPMENT KIT CONTENTS The Development kit contains the following material: • Cross Platform Carrier Board CQ7-A30 • LVDS optional Display • One 12VDC Notebook Power Adapter • Add on modules for LVDS/eDP and HDMI/DP • Cable kit Qseven® module not included. Must be purchased separately
Video Interfaces	HDMI / Display Port interface on PCI-e x16 slot LVDS / eDP interface on PCI-e x8 slot
Mass Storage	SATA Female 7p connector with dedicated Power connector, interface shared with mSATA Slot SATA Male 7+15p connector SD/MMC Card Slot SPI Flash Socket I2C EEPROM Socket
Networking	Gigabit Ethernet connector
Usb	1 x USB 3.0 Host Type-A socket 1 x USB 3.0 OTG micro-AB socket 2 x USB 2.0 Host ports on internal pin header (alternative to USB 3.0 port #0) Up to 4 x USB 2.0 Host ports on quad Type-A socket
Pci	PCI-e x 4 interface on dedicated PCI-e x 16 slot shared with 3 x PCI-e x1 slots + miniPCI-e slot (selection via jumper)
Audio	Embedded HD Audio Codec, Realtek ALC888 2 x Triple HD Audio jacks 2 x S/PDIF connectors (In & Out) Audio Expansion Slot
Serial Ports	CAN Bus (both TTL interface and with CAN transceiver) 3 x RS-232 only ports 2 x RS-232/RS/422/RS-485 configurable serial ports
Other Interfaces	Feature Connector, with I2C , SM Bus, Watchdog, Thermal and Power Management Signals LPC Bus Header SPI Pin Header SIM Card slot 4 x 7-segment LCD displays for POST codes PS/2 Mouse/keyboard pin header 2 x tachometric FAN connectors Debug Port on mini-B USB connector Power, Reset, LID and Sleep Buttons
Power Supply	+12VDC Coin Cell battery Holder for CMOS and RTC
Operating Temperature	0° C ÷ 60° C *All carrier board components must remain within the operating temperature at any and all times, including startup; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensions	345 x 170mm (13.58” x 6.69”)

Software

Link	SECO Technical Resources

Documentation

Data Sheet	[Datasheet] Q7 DEV KIT 2.0 Rel 2.3
Image	[Picture] Q7 Dev Kit 2.0
Manual	[Manual] CQ7-A30 Rel 2.0 [Schematics] 2.0 DEVKIT HDMI-DP ADAPTER [Schematics] 2.0 DEVKIT LVDS-EDP ADAPTER [Schematics] Q7 REL 20 CB DEVELOPMENT REV1