製品詳細
![]() |
Low-end Single Board Computer with NXP i.MX 6 Processor, that exploits the potential of a configurable expansion connector, to fully meet the configuration flexibility needs. Thanks to its features, this Single Board with the i.MX6 is ideal for applications in digital signage, infotainment and in all general purpose contexts requiring multimedia capabilities, high performance and high levels of parallel computing for the reproduction of relevant and/or engaging contents. |
---|---|
![]() |
NXP i.MX 6 Family, based on ARM Cortex-A9 processors: |
![]() |
4 |
![]() |
Soldered on-board DDR3L memory***:
*** For additional configurability please contact SECO |
![]() |
Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D |
![]() |
1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface |
![]() |
HDMI®: up to 1920 x 1080p |
![]() |
4GB eMMC drive soldered onboard***
*** For additional configurability please contact SECO |
![]() |
Gigabit Ethernet connector |
![]() |
2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector |
![]() |
SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: |
![]() |
Debug UART interface, TTL voltage level. |
![]() |
Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
* Please note that some of these interfaces are factory options, other configurations are made via SW. |
![]() |
+12VDC; Additional embedded Low Power RTC; |
![]() |
Free Android and Linux community BSP available at UDOO.org |
![]() |
0°C ÷ +60 °C (commercial temp.)**
*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated. |
![]() |
110 x 86.5 mm (4.5” x 3.7”) |
