SBC-SANTINOLT-MX6

NXP i.MX6プロセッサ搭載シングルボードコンピュータ（SBC）

お問い合わせ・お見積もりはこちら

CPU

NXP i.MX 6

グラフィック

GC320 2D accelerator + GC880 3D accelerator

接続性

1x 100MbE, 2x USB, RS232, RS485, CAN

メモリ

Soldered on Board DDR3L memory

商品説明	The space-saving single board computer (SBC). In a form factor optimized for 4.3 and 5.0 inch devices, the embedded board features an NXP i.MX6 single or dual core lite ARM processor as well as a variety of interfaces such as Ethernet, RS485, CAN, USB and RS232. The touch display is controlled via a TTL and I²C interface. The power supply is realized via a wide range input and with the installed Linux operating system this SBC is ready-to-use. SBC-SANTINOLT-MX6 is also available as a finished Human Machine Interface with a carefully selected touch display. Ask us about configuration options.
Cpu	NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors: i.MX6S Solo - Single core up to 1 GHz i.MX6DL Dual Lite - Dual core up to 1 GHz per core
メモリ	1 GB 32 bit DDR3L
グラフィック	2D graphics accelerator OpenGL® ES 2.0 3D graphics accelerator with a shader
ビデオインターフェース	24-bit parallel RGB interface
動画解像度	Up to 1024 x 600, 24bpp
大容量記憶装置	eMMC: 4 GB MLC micro SD slot: 4 bit MMC/SDIO/SD/SDHC
ネットワーク	1x 100MbEthernet
USB	1x USB 2.0 OTG micro-AB 1x USB 2.0 Type-A
オーディオ	1x speaker (connector), 1 W RMS (8Ω) parallel to internal speaker
シリアルポート	RS-232, RS-485
電源装置	9 ÷ 32 VDC
OS	Yocto
動作温度	0°C ÷ +60°C
寸法	113.0 x 18.0 x 47.0 mm

リンク	Linux Yocto Jethro Linux Yocto Rocko Linux Yocto Dunfell and newer Flash-N-Go Android 7.1

Data Sheet	[Datasheet] SBC-SANTINOLT-MX6 Rel 1.1
Manual	[Manual] SANTINO LT core by Garz & Fricke Rev.4