SBC-A62-MX6 [Discontinued]
Datos del producto
Descripción | Low-end Single Board Computer with NXP i.MX 6 Processor, that exploits the potential of a configurable expansion connector, to fully meet the configuration flexibility needs. Thanks to its features, this Single Board with the i.MX6 is ideal for applications in digital signage, infotainment and in all general purpose contexts requiring multimedia capabilities, high performance and high levels of parallel computing for the reproduction of relevant and/or engaging contents. |
---|---|
Cpu | NXP i.MX 6 Family, based on ARM Cortex-A9 processors: |
Núcleos máx. | 4 |
Memoria | Soldered on-board DDR3L memory***:
*** For additional configurability please contact SECO |
Gráfica | Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D |
Interfaces vídeos | 1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface |
Resolución vídeo | HDMI®: up to 1920 x 1080p |
Almacenamiento en masa | 4GB eMMC drive soldered onboard***
*** For additional configurability please contact SECO |
Trabajo en red | Gigabit Ethernet connector |
Usb | 2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector |
Audio | SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: |
Puertos de serie | Debug UART interface, TTL voltage level. |
Otras interfaces | Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
* Please note that some of these interfaces are factory options, other configurations are made via SW. |
Alimentación eléctrica | +12VDC; Additional embedded Low Power RTC; |
Sistema operativo | Free Android and Linux community BSP available at UDOO.org |
Temperatura de funcionamiento | 0°C ÷ +60 °C (commercial temp.)**
*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated. |
Dimensiones | 110 x 86.5 mm (4.5” x 3.7”) |
SYS-A62-LITE-ISCA | Descripción número de pieza SBC-A62-J System, LITE version (CPU 800MHz i.MX6 DualLIte) w/Small Heatsink, industrial temperature | |
SYS-A62-SOLO-ISCA | Descripción número de pieza SBC-A62-J System, SOLO version (CPU 800MHz i.MX6 Solo) w/Small Heatsink, industrial temperature |
¿No encontró la solución que buscaba?
¿El producto estándar no satisface sus necesidades? SECO puede colaborar para desarrollar juntos una solución de software y un hardware personalizado total o parcialmente.
Para saber más