Inicio
SBC-3.5-SBC-3.5-MX8

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

SBC-3.5-SBC-3.5-MX8

SBC de 3,5" con procesadores de aplicaciones NXP i.MX8. (THEMIS - C43)

Available in Industrial Temperature Range

Ficha de datos

Wiki

Para más información y recibir una cotización, póngase en contacto con nosotros

Contactarnos

Cpu

NXP i.MX 8 Family

Gráficas

2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit/XVSX (QuadMax and QuadPlus)

Conectividad

2x Gigabit Ethernet interfaces

Memoria

Soldered down LPDDR4

Datos del producto

Información técnica

Descripción	SBC de 3,5" con procesadores de aplicaciones NXP i.MX8
Cpu	NXP i.MX 8 Family: i.MX 8QuadMax: 2x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F i.MX 8QuadPlus: 1x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F
Núcleos máx.	8
Memoria	Soldered down LPDDR4 memory, 64-bit interface, 1600MHz. Base configuration 2GB, up-scalable to 4GB, 6GB, 8GB
Gráfica	2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit / XVSX (QuadMax and QuadPlus) 1x embedded VPU, supporting H.265 (4K30) and H.264 (1080p60) decoding and H.264 (1080p30) encoding Supports 3 independent video outputs (total combined resolution 4K)
Interfaces vídeos	OUTPUTS: HDMI® output (Micro) Optional eDP 1.4 interface Optional Single/Dual-Channel 18-/24- bit LVDS interface INPUTS: HDMI® input 2x 4-lanes MIPI-CSI Camera interfaces
Resolución vídeo	HDMI®: Up to UltraHD (4K) LVDS, eDP: up to 1080p
Almacenamiento en masa	eMMC 5.1 Drive soldered on-board, up to 64GB 1x S-ATA interface available on M.2 Socket 2 Key B Slot (interface shared with PCI-e x1) microSD Card Slot 4MB QuadSPI Flash NAND (boot device only)
Trabajo en red	2x Gigabit Ethernet interfaces Combo WiFi 802.11 a/b/g/n/ac + BT LE 4.2 module with ceramic SMT antennas on-board M.2 Socket 2 Key B Slot for M.2 Modems M.2 Socket1 Key E Slot for WiFi + BT external modules
Usb	1 x USB 3.0 Host port on Type-A socket 1x USB 2.0 OTG port on micro-AB socket 1x USB 2.0 Host port on external Type-A socket 1x USB 2.0 Host port on internal connector 2 x USB 2.0 ports available on M.2 Key B and Key E slots
Audio	I2S Audio Codec HP + MIC interfaces, available on a single combo TRRS connector
Puertos de serie	1x UART TTL 1x RS-232 / UART TTL configurable 1x RS-485 / RS-422 / UART TTL configurable 3x CAN interfaces
Otras interfaces	4x Analog Inputs 6x GPIOs SPI interface I2C interface Embedded additional RTC circuitry for lowest power consumption SIM dedicated slot
Alimentación eléctrica	+12VDC ± 10%
Sistema operativo	Wind River Linux Yocto Android
Temperatura de funcionamiento	0°C ÷ +60°C (Commercial version) -40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensiones	146 x 102 mm (5,75” x 4,02”)

Software

Enlace	SECO Technical Resources

Documentación

Data Sheet	[Datasheet] SBC-3.5-MX8 Rel 1.3
Manual	[Manual] SBC-3.5-MX8 Rel 1.0 (only for Rev A/Rev B) [Manual] SBC-3.5-MX8 Rel 2.2 (only for Rev C/Rev D)
Image	[Picture] SBC-3.5-MX8_front [Picture] SBC-3.5-MX8_back scont

Part Number

Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.

Elementos de artículos agrupados
SC43-3341-1211-I2	Descripción número de pieza SBC-C43 w/i.MX8QuadMax @1.6GHz, 8GB LPDDR4, 32GB eMMC, LVDS(12V,3.3V)+eDP(12V,3.3V)+HDMI, CSI, HDMI in, GbE+USB3.0 conn, GbE+USB2.0 conn, M.2 KeyE, M.2 Key B, 3x CAN, 1x RS-232, 1x RS-422/485, 4xAnalog In, Ind. Temp.	Contactarnos

¿No encontró la solución que buscaba?

¿El producto estándar no satisface sus necesidades? SECO puede colaborar para desarrollar juntos una solución de software y un hardware personalizado total o parcialmente.

Para saber más