ES
DE 
EN - € 
FR 
IT 
JP 
USA 
ZH 
HAGAR [Discontinued]
SBC con procesador NXP i.MX 6SoloX
Available in Industrial Temperature Range
Cpu
NXP i.MX 6SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
Gráficas
Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
Conectividad
up to 2x Fast Eth; optional WiFi + BT LE
Memoria
32-bit DDR3L memory soldered on-board, up to 1GB
Datos del producto
Descripción
|
HAGAR is a new-generation all-in-one low-cost SBC designed by SECO, equipped with a NXP i.MX 6SoloX applications processor able to run Linux. HAGAR is a revolutionary product in terms of connectivity, interactivity with the real world and cost: a new concept of single board computer ready for Internet of Things applications and for the Post-PC era. |
|---|---|
Cpu
|
NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz |
|
Núcleos máx.
|
1 + 1 |
|
Memoria
|
Soldered on-board DDR3L memory, 32-bit interface, up to 1GB |
|
Gráfica
|
Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator |
Interfaces vídeos
|
Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals) |
Resolución vídeo
|
LVDS: up to 1366x768 @60Hz, 24bpp |
Almacenamiento en masa
|
16MB NOR Quad-SPI Flash soldered onboard µSD Card slot |
Trabajo en red
|
Up to 2x Fast Ethernet RJ-45 connectors |
Usb
|
1 x USB 2.0 OTG port |
Audio
|
I2S Audio interface on programmable pin header |
Puertos de serie
|
1 x CAN Port reconfigurable as GPIO |
Otras interfaces
|
2 x I2C dedicated connectors (one reserved for Touch Screen) Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope) |
Alimentación eléctrica
|
+12VDC nominal voltage |
Sistema operativo
|
Linux |
Temperatura de funcionamiento
|
0°C ÷ +60 °C (commercial temp.)*
*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated. |
Dimensiones
|
89.5 x 87 mm (3.52” x 3.43”) |
| PN HAGAR | Descripción número de pieza SBC con procesador NXP i.MX 6SoloX |
Accessories
¿No encontró la solución que buscaba?
¿El producto estándar no satisface sus necesidades? SECO puede colaborar para desarrollar juntos una solución de software y un hardware personalizado total o parcialmente.
Para saber más
