Carrier-Q7-D03
Datos del producto
Descripción | Carrier Board for Qseven® and μQseven® Rev 2.1 Modules in embedded NUC™ Form factor |
---|---|
Interfaces vídeos | LVDS Dual Channel 24-bit + backlight connector HDMI® connector |
Almacenamiento en masa | microSD Slot |
Trabajo en red | 1 x Gigabit Ethernet connectors |
Usb | 1 x USB 2.0 Host port on Type-A socket |
Pci | 1 x PCIe x1 lane on M.2 Socket 1 Key E Slot |
Audio | Optional combo TRSS audio connector Mic in/Stereo out |
Puertos de serie | Optional 4-wires RS-232 / RS-422 / RS-485 configurable |
Otras interfaces | Optional 1 x CAN port on pin header |
Alimentación eléctrica | 12VDC through USB Type-C connector |
Temperatura de funcionamiento | 0°C ÷ +70°C * *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system. |
Dimensiones | embedded NUC™ compliant: 101.6 x101.6 mm (4”x4”) |
QD03-0001-2110-C1 | Descripción número de pieza Carrier board Q7 UDOO ARM FULL with CAN interface, UART on GPIO conn. or RS232/485 port, LVDS interface, Audio interface, HDMI® output - Comm. Temp | |
QD03-0001-2111-C1 | Descripción número de pieza Carrier board Q7 UDOO ARM FULL with CAN interface, UART on GPIO conn. or RS232/485 port, LVDS interface, Audio interface, HDMI® output - Comm. Temp |
¿No encontró la solución que buscaba?
¿El producto estándar no satisface sus necesidades? SECO puede colaborar para desarrollar juntos una solución de software y un hardware personalizado total o parcialmente.
Para saber más