SOM-SMARC-Genio700

SMARC® Rel. 2.1.1 Computer on Module (CoM) with MediaTek Genio 700 Applications Processors . (WILK)

Available in Industrial Temperature Range

Data sheet

Cpu

MediaTek Genio 700

Graphics

Mali G57 MC3 GPU

Connectivity

Up to 2x Gb Ethernet, 1x USB 3.1, 2x USB 2.0, 1x CAN, 4 x UART, opt Wi-Fi +BT 5.0, MIPI-CSI, 1x I2S

Memory

Soldered-down LPDDR4X-3733 memory, up to 8GB total

Product details

Technical Info

Description	SMARC® Rel. 2.1.1 Computer on Module (CoM) with MediaTek Genio 700 Applications Processors
Cpu	2x Arm® Cortex®-A78 @ 2.2 GHz 6x Arm® Cortex®-A55 @ 2.0 GHz Mali G57 MC3 GPU AI Accelerator: Cadence Tensilica VP6 with Mediatek APU3.0 System Companion Chip: MDSP RV55 DSP: Candence Tensilica HiFi5 Image Signal Processor (ISP)
Memory	Soldered-down LPDDR4X-3733/LPDDR4-3200 memory, up to 8GB total
Video Interfaces	LVDS Dual Channel or eDP (factory alternatives) HDMI DP
Video Resolution	MIPI/eDP: up to 2560x1600p60 HDMI/DP: up to 4K60
Mass Storage	eMMC 5.1 Drive soldered on-board, up to 64GB (boot device) SDIO Interface
Networking	1x Gigabit Ethernet (RGMII) 1x 100Mbit Ethernet (USB) Optional Wifi 802.11 a/b/g/n/ac 2x2 and BT 5.3 utilising onboard module with M2.1216 standard form factor
Usb	1x USB3.1 1x USB2.0 Host/Slave 4x USB2.0 Host
Audio	2x I2S port
Serial Ports	2x UART (4-wires) 2x UART (2-wires)
Other Interfaces	GPIOs MIPI-CSI camera interface General Purpose I2C Bus PWM ports
Security	TPM
Embedded Controller Functionalities	Power management Watchdog Boot select signals GP I/O
Power Supply	+5VDC ± 5% and +3.3V_RTC
Operating System	Linux Yocto Kirkstone Android T (13)
Operating Temperature	0 ÷ +60°C (Commercial Range)* -20 ÷ +85°C (Extended Commercial Range)* -40 ÷ +85°C (Industrial Range)* *Measured at any point of SECO standard heatspreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	82 x 50 mm