Home
SBC-3.5-MX8M-Mini

Skip to the beginning of the images gallery

SBC-3.5-MX8M-Mini

3.5” SBC with the NXP i.MX 8M Mini Processors. (ASTRID - C61)

Data sheet

Wiki

Cpu

NXP i.MX 8M Mini Family

Graphics

GC320 2D accelerator + GCNanoUltra 3D accelerator

Connectivity

Up to 2x GbE; opt Wifi; up to 2x RS-232 or RS-485 or CAN; opt LTE Cat4 Modem with SIM slot or eSIM

Memory

Soldered on-board LPDDR4-3000 memory

Product details

Technical Info

Description	3.5" SBC with the NXP i.MX 8M Mini Processors
Cpu	NXP i.MX 8M Mini Family based on ARM® Cortex®-A53 cores + general purpose Cortex®-M4 400MHz processor: i.MX 8M Mini Quad – Full featured, 4x Cortex®-A53 cores up to 1.8GHz i.MX 8M Mini Dual – Full featured, 2x Cortex®-A53 cores up to 1.8GHz i.MX 8M Mini Solo – Full featured, 1x Cortex®-A53 cores up to 1.8GHz i.MX 8M Mini Quad Lite – 4x Cortex®-A53 cores up to 1.8GHz, no VPU i.MX 8M Mini Dual Lite – 2x Cortex®-A53 cores up to 1.8GHz, no VPU i.MX 8M Mini Solo Lite – 1x Cortex®-A53 cores up to 1.8GHz, no VPU
Max Cores	4+1
Memory	Soldered-down LPDDR4 memory, up to 4GB total, 32-bit interface
Graphics	GC320 2D accelerator + GCNanoUltra 3D accelerator Embedded VPU (not for Lite processors), able to offer: VP9, HEVC/H.265, AVC/H.264, VP8 HW Decoding AVC/H.264, VP8 HW encoding OpenGL ES 2.0, OpenVG 1.1 support
Video Interfaces	LVDS Single/Dual Channel connector or eDP connector (factory alternatives) MIPI-CSI Camera interface connector
Video Resolution	Up to 1920x1080p60, 24bpp
Mass Storage	Optional eMMC 5.1 drive on-board, up to 64GB MicroSD slot 2Kb I2C Flash QSPI Flash
Networking	2x GbEthernet interfaces (1 optional) Optional shielded ultra-small dual Band WiFi 802.11 a/b/g/n/ac with BT 5.0 module onboard Optional soldered on-board LTE Cat 4 Modem with SIM slot or Telenor eSIM with 5MB Bundle
Usb	2x USB 2.0 Host ports on Type-A socket 2x USB 2.0 Host ports on internal pin header 1x USB Host or client port on micro-AB connector (interface shared with the optional on-board modem)
Audio	Digital Mic In connector (2x PDM inputs) Amplified mono Speaker Output
Serial Ports	Up to 2x RS-232 or RS-485 or CAN Serial ports (factory options, shared with GPIOs and SPI interfaces) 2x Debug UARTS
Other Interfaces	I/O Connectors with: • 2xPWM @3.3V • GP I2C interface @3.3V • 1x Open Drain output (max 12V, 250mA) • 2x GPIOs @3.3V • 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN (factory options) • 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN + on-board ultra-low power RTC (factory options) Watchdog Dedicated connector for I2C Touch Screen Controller Support Onboard Buzzer (Comm. temp. range only) Optional Ultra Low Power RTC
Power Supply	+12VDC÷ +24VDC
Operating System	Yocto Android (planned)
Operating Temperature	0°C ÷ +60°C (extended version) -40°C ÷ +85°C (industrial version, limited to -30°C ÷ +85°C with WiFi/BT module on-board) *Measured at any point of SECO standard heatsink for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	146x102 mm (3.5" form factor)

Software

Link	SECO Technical Resources

Documentation

Data Sheet	[Datasheet] SBC-3.5-MX8M-Mini Rel 1.6
Manual	[Manual] ASTRID Rel 1.4
Image	[Picture] ASTRID_front [Picture] ASTRID_back

Part Number

Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.

Grouped product items
SC61-1533-C811-C1-V_	Part Number Description SBC-C61 w/i.MX 8M Mini Quad, 2GB LPDDR4, 16GB eMMC, LVDS, onboard PWR/RST Button, 2xGPIO, 1xRS-232, 1x CAN, Audio, 2x GbE, power jack , Secure Element - Comm.Temp.	Contact us
SC61-9423-D241-I1-V	Part Number Description SBC-C61 w/i.MX 8M Mini Dual, 1GB LPDDR4, 8GB eMMC, LVDS, 6xGPIO, 1xRS-232, 2x GbE, power jack , Secure Element - Ind.Temp.	Contact us

Accessories

Didn't find the solution you were looking for?

Does the standard product not meet your needs? SECO can sit down with you to develop a partially or fully-customized hardware and software solution.

Find out more