Carrier-Trizeps-pConXS

Carrier Board for Trizeps SODIMM SOMs

Data sheet

Wiki

Graphics

HDMI, LVDS or Dual LVDS, RGB interfaces enable easy integration of various touch displays

Product details

Technical Info

Description	The Carrier-Trizeps-pConXS is a very compact and multifunctional Carrier Board Trizeps SODIMM SOMs. In addition to numerous standard interfaces, an analog camera interface and a Mini PCI Express card edge connector are available. The baseboard supports a lot of LCD displays thanks to the HDMI, Dual LVDS and touchscreen LCD interfaces.
Cpu	Defined by compatible Trizeps SODIMM SOMs • NXP i.MX 6 Quad, Dual, DualLite, Solo, SoloX ARM Cortex A9 up to 1.0 GHz on Trizeps VII SOM • NXP i.MX 8M ARM Cortex A53 up to 1.5 GHz, up to Quad Core, integrated ARM Cortex M4 on Trizeps VIII SOM • NXP i.MX 8M Mini ARM Cortex A53 up to 1.8 GHz, up to Quad Core, integrated ARM Cortex M4 on Trizeps VIII Mini SOM • NXP i.MX 8M Nano ARM Cortex A53 up to 1.5 GHz, up to Quad Core, integrated ARM Cortex M7 on Trizeps VIII Nano SOM • NXP i.MX 8M Plus ARM Cortex A53 up to 1.8 GHz, up to Quad Core, integrated ARM Cortex M7 on Trizeps VIII Plus SOM
Graphics	RGB, LVDS, Dual LVDS, HDMI (with Trizeps VII, Trizeps VIII, Trizeps VIII Plus)
Video Interfaces	HDMI, LVDS or Dual LVDS, RGB interfaces enable easy integration of various touch displays
Mass Storage	SD Card Socket
Networking	10/100/1000 Mbit Ethernet RJ45 Connector Wireless functionalities depend on Trizeps SOM: • Trizeps VII: Onboard WiFi/BT Modul, IEEE 802.11 a/b/g/n/e/i/h/d/k/r/w, +18 dBm, 72 Mbps (20 MHz) and up to 150 Mbps (40 MHz), BT 3.0+ EDR • Trizeps VIII and Trizeps VIII Mini: Onboard WiFi/BT module, WiFi 2.4GHz/5Ghz, 802.11 a/b/g/n/ac 2x2 MU-MIMO / BT 5.0
Usb	USB2.0 Host, USB2.0 OTG, USB2.0 touch interface, USB2.0 Header
Pci	Mini PCIe Half-/Full Size card edge connector, combined with nano SIM card slot
Audio	3.5mm Stereo Jack, Digital Microphone Connector SL2-40 pin header: stereo headphone (16R and 32R), speaker (Mono, 8R), LineIn, microphone
Serial Ports	RS232 via D-SUB SL2-40 pin header: 2x UART
Other Interfaces	4 wire resistive touch interface, Realtime Clock with Backup Cap or battery, LED, 3-Axis 12-bit/8-bit digital accelerometer, temp. sensor, SATA II connector, I2C extension header, reset and user tactile switch, powerfail detection, analog BNC / Mini BNC parallel camera interface, MiPi camera connector 1x 40-pin extension connector: GPIOs (1x with PWM), SPDIF (out and in), 2x CAN, SDIO, I2C, 3 x ADC
Power Supply	Industrial +12 up to +24V supply
Operating System	Linux Yocto, Linux Debian, Android, Windows 10 IoT
Operating Temperature	-20 ÷ 85°C
Dimensions	118.5 mm x 84.0 mm x 43.0 mm