EN - €
DE 
ES 
FR 
IT 
JP 
USA 
ZH 
Carrier-Q7-D03
Carrier Board for Qseven® and μQseven® Rev 2.1 Modules in embedded NUC™ Form factor . (Formerly CQ7-D03 )
Product details
Description
|
Carrier Board for Qseven® and μQseven® Rev 2.1 Modules in embedded NUC™ Form factor |
|---|---|
Video Interfaces
|
LVDS Dual Channel 24-bit + backlight connector HDMI® connector |
Mass Storage
|
microSD Slot |
Networking
|
1 x Gigabit Ethernet connectors |
Usb
|
1 x USB 2.0 Host port on Type-A socket |
|
Pci
|
1 x PCIe x1 lane on M.2 Socket 1 Key E Slot |
Audio
|
Optional combo TRSS audio connector Mic in/Stereo out |
Serial Ports
|
Optional 4-wires RS-232 / RS-422 / RS-485 configurable |
Other Interfaces
|
Optional 1 x CAN port on pin header |
Power Supply
|
12VDC through USB Type-C connector |
Operating Temperature
|
0°C ÷ +70°C * *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system. |
Dimensions
|
embedded NUC™ compliant: 101.6 x101.6 mm (4”x4”) |
| QD03-0001-2110-C1 | Part Number Description Carrier board Q7 UDOO ARM FULL with CAN interface, UART on GPIO conn. or RS232/485 port, LVDS interface, Audio interface, HDMI® output - Comm. Temp | |
| QD03-0001-2111-C1 | Part Number Description Carrier board Q7 UDOO ARM FULL with CAN interface, UART on GPIO conn. or RS232/485 port, LVDS interface, Audio interface, HDMI® output - Comm. Temp |
Didn't find the solution you were looking for?
Does the standard product not meet your needs? SECO can sit down with you to develop a partially or fully-customized hardware and software solution.
Find out more
