SBC-C23 [Discontinued]

Smart Edge Compute Unit with NXP i.MX 6SoloX Processor

数据表

Wiki

联系我们了解更多信息和报价

联系我们

中央处理器

NXP i.MX6SX SoloX

图形

Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator

连接

2x Fast Eth; WiFi; BLE; 3x Multicolor Signalling LEDs; 1x RS-232 port; 1x RS-485 port; 2x CAN port

记忆

32-bit DDR3L memory soldered onboard

产品详情

技术信息

说明	SBC-C23is a Smart Edge Compute Unit, built on NXP i. MX 6SoloX Processor, enables multi core edge computing and networking, while ensuring wide connectivity. As far as memory is concerned, the device features a 32-bit DDR3L memory soldered on-board, up to 1 GB. When it comes to interfaces the board is plentiful: networking interfaces - such as 2x Fast Ethernet RJ-45 ports, Wifi, BT LE combo module with on-board antenna - but also other interfaces like 2x CAN port, 4x analog inputs, I2C, 2x PWM and many others. The device is indeed a multiprotocol bridging for industrial PLCs and smart factory devices. Fields of application include Home Automation, Industrial Internet of Things and Surveillance among the many.
中央处理器说明	NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
内存说明	32-bit DDR3L memory soldered onboard, up to 1GB
图形说明	Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported
视频界面说明	Optional Single Channel 18- / 24- bit LVDS connector w/ Touch Screen (I2C signals) Max resolution 1366x768 @60 Hz, 24bpp
大容量存储器说明	8GB eMMC drive on-board μSD Card slot 1MB SPI Flash
网络说明	Up to 2x FastEthernet RJ-45 ports Optional Single Band or Dual Band WiFi (802.11 b/g/n) + BT LE combo module with on-board PCB antennas or u/FL connectors, factory alternatives Optional LTE-Cat4 Modem with integrated GNSS, with up to 3 external antennas
USB说明	1 x USB 2.0 Type-A socket 1 x USB 2.0 OTG on micro-AB connector
音频说明	On-board buzzer
串行端口	All available on expansion connector: - 1 x RS-232 port - 1x RS-485 port - 2 x CAN port
其他接口	M.2 Socket 1 Key E 2230 (USB + PCI-e x1 interfaces) Slot M.2 Socket 2 Key B 2242 (USB interface) Slot microSIM slot or electronic SIM soldered on-board for the optional Modem and/or the M.2 Key B Slot 3x Multicolor signalling LEDs Reset Button Expansion PCB terminal block with: -4x analog inputs -I2C 2x PWM
电源	+12VDC DC power jack and 2-poles PCB terminal block for voltage supply Optional Li-Ion Rechargeable battery
操作系统	Wind River Linux
操作温度说明	0°C ÷ +60°C (Commercial version) -40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
尺寸	153 x 89,5 mm (6” x 3,5”)