产品详情
说明 | Low-end Single Board Computer with NXP i.MX 6 Processor, that exploits the potential of a configurable expansion connector, to fully meet the configuration flexibility needs. Thanks to its features, this Single Board with the i.MX6 is ideal for applications in digital signage, infotainment and in all general purpose contexts requiring multimedia capabilities, high performance and high levels of parallel computing for the reproduction of relevant and/or engaging contents. |
---|---|
中央处理器说明 | NXP i.MX 6 Family, based on ARM Cortex-A9 processors: |
最大核数 | 4 |
内存说明 | Soldered on-board DDR3L memory***:
*** For additional configurability please contact SECO |
图形说明 | Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D |
视频界面说明 | 1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface |
视频分辨率说明 | HDMI®: up to 1920 x 1080p |
大容量存储器说明 | 4GB eMMC drive soldered onboard***
*** For additional configurability please contact SECO |
网络说明 | Gigabit Ethernet connector |
USB说明 | 2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector |
音频说明 | SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: |
串行端口 | Debug UART interface, TTL voltage level. |
其他接口 | Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
* Please note that some of these interfaces are factory options, other configurations are made via SW. |
电源 | +12VDC; Additional embedded Low Power RTC; |
操作系统 | Free Android and Linux community BSP available at UDOO.org |
操作温度说明 | 0°C ÷ +60 °C (commercial temp.)**
*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated. |
尺寸 | 110 x 86.5 mm (4.5” x 3.7”) |