|Description||3.5" SBC Industrial ARM solution for IoT edge computing applications|
NXP i.MX 8 Family:
Soldered down LPDDR4 memory, 64-bit interface, 1600MHz.
2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit / XVSX (QuadMax and QuadPlus)
HDMI: Up to UltraHD (4K)
eMMC 5.1 Drive soldered on-board, up to 64GB
2x Gigabit Ethernet interfaces
1 x USB 3.0 Host port on Type-A socket
I2S Audio Codec
1x UART TTL
4x Analog Inputs
+12VDC ± 10%
Wind River Linux
0°C ÷ +60°C (Commercial version)
*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
|Dimensions||146 x 102 mm (5,75” x 4,02”)|
Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.
|SC43-3341-1211-I2||Part Number Description SBC-C43 w/i.MX8QuadMax @1.6GHz, 8GB LPDDR4, 32GB eMMC, LVDS(12V,3.3V)+eDP(12V,3.3V)+HDMI, CSI, HDMI in, GbE+USB3.0 conn, GbE+USB2.0 conn, M.2 KeyE, M.2 Key B, 3x CAN, 1x RS-232, 1x RS-422/485, 4xAnalog In, Ind. Temp.||
Out of stock
Didn't find the solution you were looking for?
Does the standard product not meet your needs? SECO can sit down with you to develop a partially or fully-customised hardware and software solution.Find out more