SECOCQ7-pITX [Discontinued]

Carrier Board for Qseven® QuadMo747 modules on Pico-ITX Form Factor

Connectivity

9x GPIO on 10 Pin Header Connector; 2x GbE

Product details

Technical Info

Description	The Qseven® Carrier Board SECOCQ7-pITX is a full featured carrier board for Qseven® QuadMo747 CPU modules and is in the size of a Pico-ITX board. Due to the embedded module concept this baseboard can be used with every available Qseven® CPU module.
Video Interfaces	Analog VGA on 12 Pin Header LVDS Interface, 34 pin 2mm pin header Backlight Connector, 6 pin, 2mm Pin Header
Mass Storage	1 x S-ATA connectors 1 x SD Card Slot
Networking	2 x GbE on Front Panel (1 alternative to miniPCI Express Slot)
Usb	2 x Double USB on the Front Panel 1 x USB Client on the Front Panel 1 x USB internal
Pci	1 x miniPCI Express (alternative to 1GbE)
Audio	Line In – Mic In on 8 Pin Connector Hearphone on 5pin Header Speaker on 5pin Header
Serial Ports	2 x Serial Ports (1 x RS232 full modem, RS-485 configurable, 1x TX/RX signals at TTL level)
Other Interfaces	9 x GPIO on 10 Pin Header Connector
Power Supply	On Board Lithium Battery for CMOS Backup and RTC Smart Battery Connector 12V Power jack 5 Pin Header for Power and Reset Button Optional 12V Micro- Fit jack
Operating Temperature	0°C ÷ +60°C (commercial version) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensions	100 x 72 mm (3,94” x 2,83”)