SANTINO LT core (by Garz & Fricke)

Single Board Computer (SBC) based on NXP i.MX6 processor

Cpu

NXP i.MX 6

Graphics

GC320 2D accelerator + GC880 3D accelerator

Connectivity

1x 100MbE, 2x USB, RS232, RS485, CAN

Memory

Soldered on Board DDR3L memory

Description	The space-saving single board computer (SBC). In a form factor optimized for 4.3 and 5.0 inch devices, the embedded board features an NXP i.MX6 single or dual core lite ARM processor as well as a variety of interfaces such as Ethernet, RS485, CAN, USB and RS232. The touch display is controlled via a TTL and I²C interface. The power supply is realized via a wide range input and with the installed Linux operating system this SBC is ready-to-use. SANTINO LT is also available as a finished Human Machine Interface with a carefully selected touch display. Ask us about configuration options.
Cpu	NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors: i.MX6S Solo - Single core up to 1 GHz i.MX6DL Dual Lite - Dual core up to 1 GHz per core
Memory	1 GB 32 bit DDR3L
Graphics	2D graphics accelerator OpenGL® ES 2.0 3D graphics accelerator with a shader
Video Interfaces	24-bit parallel RGB interface
Video Resolution	Up to 1024 x 600, 24bpp
Mass Storage	eMMC: 4 GB MLC micro SD slot: 4 bit MMC/SDIO/SD/SDHC
Networking	1x 100MbEthernet
Usb	1x USB 2.0 OTG micro-AB 1x USB 2.0 Type-A
Audio	1x speaker (connector), 1 W RMS (8Ω) parallel to internal speaker
Serial Ports	RS-232, RS-485
Power Supply	9 ÷ 32 VDC
Operating System	Yocto
Operating Temperature	0°C ÷ +60°C
Dimensions	113.0 x 18.0 x 47.0 mm