Q7 STARTER KIT 2.1

Name: Q7 STARTER KIT 2.1
Price: 9999 USD
Availability: OutOfStock

Cross Platform Starter Kit compatible with both x86 and Arm Rel. 2.0 / 2.1 Qseven® modules

Available in Industrial Temperature Range

Data sheet

Product details

Technical Info

Description	The Starter Kit contains: • CQ7-D59 (DP or HDMI version) carrier board for Qseven® Rel. 2.0 / 2.1 compliant modules • HD audio module • I2S audio module • One 24VDC power brick adapter • Cable kit • Adapter for mounting a µQseven® module on standard Qseven® carrier boards (Module not included. Must be purchased separately)
Video Interfaces	LVDS Single/Dual Channel 18-24-bit + HDMI Connector or 2 x eDP connectors + Multimode Display Port
Mass Storage	1x SATA connector with HDD power connector 1x M.2 Socket 2 2242 Key B SSD slot microSD Slot on combo microSD + SIM connector
Networking	2 x Gigabit Ethernet connectors 1 x M.2 Socket 2 2242/3042 Key B Slot for WWAN cellular modem modules, connected to on-board miniSIM slot
Usb	2x Superspeed USB 5Gbp Host port on dual Type-A socket 1x USB 2.0 Host ports on double Type-A sockets 1x USB 2.0 Host on internal M.2 socket 1 x USB 2.0 OTG port on micro-AB socket (USB port shared with USB 2.0 lanes of 1 x USB 3.0)
Audio	Audio interface on internal pin header
Serial Ports	4-wires RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector 2x RS-232 full-modem serial ports on internal header (need LPC interface from Qseven® module) CAN interface on PCB terminal block
Other Interfaces	SPI internal pin header LPC Bus internal pin header 16x GPIO signals on pin header via a GPIO expander controlled via SM Bus or I2C Front panel header 1x 28 pin connector for additional features (I2C, ACPI signals, SMBus, watchdog, thermal management) +12V tachometric FAN connector Optional debug USB port on miniB socket Optional MFG connector for JTAG programming of Qseven® module
Power Supply	24VDC ±5% through Micro-fit 2x2 power connector Coin cell battery holder for powering CMOS and RTC
Operating Temperature	-40°C ÷ +85°C (Industrial temperature range) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. The customer must design a product-specific cooling solution for their final system.
Dimensions	146 x 102 mm (5.75” x 4.02”)