jp
de 
en 
es 
fr 
it 
ru 
zh 
ハイライト
GraphicsIntegrated Graphics Vivante GC400T, 2D and 3D HW accelerator
Memory32-bit DDR3L memory soldered on-board, up to 1GB
Connectivityup to 2x Fast Eth; optional WiFi + BT LE
HAGAR is a new-generation all-in-one low-cost SBC designed by SECO, equipped with a NXP i.MX 6SoloX applications processor able to run Linux. HAGAR is a revolutionary product in terms of connectivity, interactivity with the real world and cost: a new concept of Single Board Computerr ready for Internet of Things applications and for the Post-PC era.
Security & Compliance by Design
SECO products integrate security functions that enable out-of-the-box compliance with the RED directive [EN18031-1]. Certification documentation is available upon request. Security monitoring, patching and update automation are powered by Clea.
Secure Boot
Built-in Secure Boot to ensure system integrity from the first startup.
OTA Updates
Remote and secure software update distribution for your devices.
Device Monitoring
Continuous monitoring of device status and activity with Clea.
Secure Operating System
Yocto-based OS integration for customizable and secure system builds.
Certified Security
Compliance with EN18031-1 standards for secure and reliable embedded systems.
Docker Technology
Isolated and flexible application management through containerization.
Application Hub
SECO Application Hubで利用可能な、この製品と互換性のあるアプリケーションをご覧ください。インテリジェント機能の開発と展開を加速するためのすぐに使用できるソリューション。
Machine Alert Assistance with Operator Recognition
HMI system that uses AI to recognize operators during alerts and show personalized troubleshooting instructions.
People Counter
Lightweight real-time people counting model based on quantized YOLOX, optimized for edge devices using LiteRT (TensorFlow Lite) .
PoseNet for Multi-Person Pose Detection
Lightweight and quantized PoseNet model for real-time multi-person pose estimation on edge hardware.
HRNet for Human Pose Estimation
High-resolution neural network for accurate keypoint detection in human pose estimation tasks.
CPU Description
|
NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz |
|---|---|
|
Max Cores
|
1 + 1 |
Memory Description
|
Soldered on-board DDR3L memory, 32-bit interface, up to 1GB |
Graphics Description
|
Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator |
Video Interfaces Description
|
Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals) |
Video Resolution Description
|
LVDS: up to 1366x768 @60Hz, 24bpp |
|
Mass Storage Description
|
16MB NOR Quad-SPI Flash soldered onboard µSD Card slot Optional eMMC drive soldered on-board, up to 8GB |
Networking Description
|
Up to 2x Fast Ethernet RJ-45 connectors |
USB Description
|
1 x USB 2.0 OTG port |
Audio Description
|
I2S Audio interface on programmable pin header |
Serial Ports
|
1 x CAN Port reconfigurable as GPIO |
Other Interfaces
|
2 x I2C dedicated connectors (one reserved for Touch Screen) Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope) |
|
Power Supply
|
+12VDC nominal voltage |
Operating System
|
Linux |
Operating Temperature Description
|
0°C ÷ +60 °C (commercial temp.)*
*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated. |
Dimensions
|
89.5 x 87 mm (3.52” x 3.43”) |
部品番号
Accessories
