ホーム
DEV-KIT-Q7-2.0 [Discontinued]

DEV-KIT-Q7-2.0 [Discontinued]

Cross Platform Starter Kit compatible with both x86 and Arm Rev. 2.0 Qseven® modules: a complete package including the basic components necessary to start developing. (Formerly Q7 DEV KIT 2.0)

データシート

Wiki

構成

お問い合わせ・お見積もりはこちら

お問い合わせ

製品詳細

技術情報

商品説明	The Starter Kit contains: • Carrier board for Qseven® Rev. 2.0 compliant modules CQ7-A42(DP or HDMI® version) • HD Audio module • I2S Audio module • One 12VDC Notebook Power Adapter • Cable kit
ビデオインターフェース	LVDS Dual Channel 24-bit + backlight connectors or 2 x eDP connectors Multimode Display Port or HDMI® Connector
大容量記憶装置	1 x S-ATA connector with HDD Power connector 1 x mSATA Slot microSD Slot on combo microSD + SIM connector
ネットワーク	Up to 2 x Gigabit Ethernet connectors
USB	1 x USB 3.0 Host port on type-A socket 2 x USB 2.0 Host ports on double Type-A sockets 2 x USB 2.0 Host ports on internal pin header 1 x USB 2.0 OTG port on micro-AB socket (USB port shared with miniPCI-e slot)
PCI	miniPCI-e slot Full / Half size, combined with SIM card slot
オーディオ	Audio interface on internal pin header
シリアルポート	4-wires RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector 2 x RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven® module) CAN interface on PCB terminal block
その他のインターフェース	SPI internal pin header LPC Bus internal pin header SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header Front Panel Header 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric FAN connector Optional Debug USB port on miniB socket Optional MFG connector for JTAG programming of Qseven® module
電源装置	+12VDC Mini-fit Standard ATX power connector Coin cell battery Holder for CMOS and RTC
動作温度	-40°C ÷ +85 °C (industrial range) *All carrier board components must remain within the operating temperature at any and all times, including startup; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
寸法	146 x 102 mm (5,75” x 4,02”)

ソフトウェア

リンク	SECO Technical Resources

文書化

Data Sheet	[Datasheet] Q7 STARTER KIT 2.0 Rel 2.4
Image	[Image] Q7 STARTER KIT 2.0
Manual	[Schematics] Q7 STARTER KIT 2.0 [Manual] Q7 STARTER KIT 2.0

品番

グループ製品アイテム
Q7 STARTER KIT 2.0	品番内容 Cross Platform Starter Kit compatible with both x86 and Arm Rev. 2.0 Qseven® modules: a complete package including the basic components necessary to start developing	お問い合わせ