Accueil
SYS-B08-7

Skip to the beginning of the images gallery

SYS-B08-7

Panneau embarqué avec écran LCD de 7" basé sur le processeur NXP i.MX 6SoloX

Feuille de données

Wiki

Contactez-nous pour plus d’informations et un devis

Contactez-nous

Cpu

NXP i.MX 6SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

Graphiques

Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator

Connectivité

up to 2x Fast Eth; optional WiFi + BT LE

Mémoire

32-bit DDR3L memory soldered on-board, up to 1GB

Détails produit

Info technique

Description	The SYS-B08-7 is an Embedded Panel with 7” LCD display based on the NXP i.MX 6SoloX Processor. This smart, compact, industrial touch system features a 7” capacitive full-flat multi-touch screen, perfect for IoT. Thanks to the lightweight and easy installation with integrated HW accelerator, this solution is suitable for 24-hr digital signage usage. The SYS-B08-7 low power consumption and fanless system is connectivity-oriented and has Linux ready for quick system deployment. It is ideal for Industrial Automation, Industrial Internet of Things (IIoT), Digital Signage and HMI applications.
Cpu	NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
Cores max	1+1
Mémoire	Soldered on-board DDR3L memory, 32-bit interface SYS-B08-BASIC/D: 512MB SYS-B08-FULL/D: 1GB
Graphiques	Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported
Interfaces vidéo	Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals) 24-bit Parallel RGB Connector
Résolution vidéo	LVDS: up to 1366x768 @60Hz, 24bpp RGB: up to 1920x1080p @60Hz, 24bpp
Stockage masse	16MB NOR Quad-SPI Flash soldered onboard µSD Card slot SYS-B08-FULL/D: 8GB eMMC soldered onboard
Réseau	SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard
Usb	1 x USB 2.0 OTG port 3 x USB 2.0 Host ports on standard Type-A socket 1 x USB 2.0 Host port on internal pin header
Audio	I2S Audio interface on programmable pin header S / PDIF interface (In and Out) on programmable pin header
Ports sériels	1 x CAN Port reconfigurable as GPIO 2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header
Autres Interfaces	2 x I2C dedicated connectors (one reserved for Touch Screen) 6 analog inputs for A/D Conversion Programmable () expansion pin header connector, able to offer: • CSI interface input (PAL and NTSC formats supported) • Up to 20 GPIO • SPI interface • SPDIF Audio interface • I2S Audio interface • CAN interface (TTL level) • 5 x PWM • 3 x I2C • 3 x serial ports (2x RS-232 +1xRS-485 interface) Embedded Low Power RTC () Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor. Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)
Alimentation	+12VDC nominal voltage +3VDC cabled Coin Cell Battery
Système d’exploitation	Linux Yocto
Température de fonctionnement	0°C ÷ +60°C (Commercial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	189.60 x 121.40 x 28.20 mm

Logiciel

Lien	SECO Technical Resources

Documentation

Data Sheet	[Datasheet] SYS-B08-7 Rel 1.4
Image	[Picture] SYS-B08-7_back [Picture] SYS-B08-7_front [Picture] SYS-B08-7_lat

Part Number

Articles du produit groupé
PN_SYS-B08-7	Description n° pièce Panneau embarqué avec écran LCD de 7" basé sur le processeur NXP i.MX 6SoloX	Contactez-nous

Visitez notre boutique

Achetez et recevez immédiatement les produits SECO

Aller au boutique

Accessories

Vous n'avez pas trouvé la solution que vous cherchez?

Le produit standard ne répond pas à vos besoins? SECO est à votre disposition pour développer ensemble une solution hardware et logicielle partiellement ou entièrement personnalisée.

SYS-B08-7

Détails produit

Visitez notre boutique

Vous n'avez pas trouvé la solution que vous cherchez?

Subscribe to newsletter