Accueil
SBC-S984-MX6

Skip to the beginning of the images gallery

SBC-S984-MX6

SBC with NXP i.MX 6 Processor (VIKTORIA-S984)

Available in Industrial Temperature Range

Feuille de données

Contactez-nous pour plus d’informations et un devis

Contactez-nous

Cpu

Single-, Dual- and Quad- Core (ARM Cortex™A9 Cores)

Graphiques

2D/3D dedicated graphics processors

Connectivité

miniPCI-e slot; CAN Bus; Wi-Fi add-on module;

Mémoire

Up to 2GB DDR3L on-board

Détails produit

Info technique

Description	SBC-S984-MX6 is a Single Board Computer (only 80 x 67 mm) based on i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex™ A9 ARM Core (up to Quad Core processors), ideal for applications requiring multimedia capabilities and/or high levels of parallel computing, maintaining advantages offered by low-power consuming ARM architecture in an extremely reduced space.
Cpu	NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors - i.MX6S Solo - Single core up to 1GHz - i.MX6DL Dual Lite - Dual core up to 1GHz per core - i.MX6D Dual - Dual core up to 1GHz per core - i.MX6Q Quad - Quad core up to 1GHz per core
Cores max	4
Mémoire	Up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
Graphiques	Dedicated 2D Hardware accelerator Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q) Supports up to 3 independent displays with i.MX6D and i.MX6Q Supports 2 independent displays with i.MX6DL and i.MX6S
Interfaces vidéo	1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface HDMI Interface Video Input Port / Camera connector (only with PCB rev. C or higher)
Résolution vidéo	LVDS, up to 1920x1200 HDMI, up to 1080p
Stockage masse	On-board eMMC drive, up to 8 GB mSATA Half-size slot (shared with miniPCI-express)
Réseau	Gigabit Ethernet connector
Usb	3 x standard USB 2.0 Type A 1 x USB OTG on micro-AB connector Internal USB for optional WiFi module
Pci	miniPCI-express slot, shared with mSATA (only PCI-e 1.1 and Gen2 are supported)
Audio	AC’97 Audio Codec Mic In, Line out internal pin header connector
Ports sériels	1 x RS-232 serial port TTL debug UART (Tx, RX only) CAN interface internal connector
Autres Interfaces	I2C touch Connector Internal connector for power and reset buttons
Alimentation	+12VDC ± 10% Embedded additional RTC circuitry for lowest power consumption Optional RTC Battery with lead cable and connector
Température de fonctionnement	0°C ÷ +70 °C (commercial version) -40°C ÷ +85°C (industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	80 x 67 mm (3,15” x 2,64”)

Logiciel

SECO Technical Resources	SECO Technical Resources

Documentation

Data Sheet	[Datasheet] VIKTORIA Rel 3.1
Manual	[Manual] VIKTORIA Rel 4.0
Image	[Picture] VIKTORIA_back [Picture] VIKTORIA_front

Visitez notre boutique

Achetez et recevez immédiatement les produits SECO

Aller au boutique

Accessories

Vous n'avez pas trouvé la solution que vous cherchez?

Le produit standard ne répond pas à vos besoins? SECO est à votre disposition pour développer ensemble une solution hardware et logicielle partiellement ou entièrement personnalisée.

SBC-S984-MX6

Détails produit

Visitez notre boutique

Vous n'avez pas trouvé la solution que vous cherchez?

Subscribe to newsletter