Accueil
SBC-A62-MX6

Skip to the beginning of the images gallery

SBC-A62-MX6

SBC avec processeur NXP i.MX 6. (DORIS - A62)

Feuille de données

Wiki

Contactez-nous pour plus d’informations et un devis

Contactez-nous

Cpu

Single-, Dual- and Quad- Core (ARM® Cortex® A9 Cores)

Graphiques

2D/3D dedicated graphics processors

Connectivité

Wi-Fi add-on module; up 28 GPI/Os; CAN Bus

Mémoire

Up to 2GB DDR3L on-board

Détails produit

Info technique

Description	Low-end Single Board Computer with NXP i.MX 6 Processor, that exploits the potential of a configurable expansion connector, to fully meet the configuration flexibility needs. Thanks to its features, this Single Board with the i.MX6 is ideal for applications in digital signage, infotainment and in all general purpose contexts requiring multimedia capabilities, high performance and high levels of parallel computing for the reproduction of relevant and/or engaging contents.
Cpu	NXP i.MX 6 Family, based on ARM Cortex-A9 processors: SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz
Cores max	4
Mémoire	Soldered on-board DDR3L memory*: SBC-A62-J-SOLO: 512MB 32-bit interface SBC-A62-J-LITE: 1GB 64-bit interface SBC-A62-J-PLUS: 2GB 64-bit interface SBC-A62-J-QUAD: 1GB 64-bit interface * For additional configurability please contact SECO
Graphiques	Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD) HW encoding of MPEG-4, H.263 V2, H.264, MJPEG HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays
Interfaces vidéo	1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface HDMI® interface 1.4
Résolution vidéo	HDMI®: up to 1920 x 1080p LVDS: up to 1920 x 1200
Stockage masse	4GB eMMC drive soldered onboard* microSD Card slot SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector * For additional configurability please contact SECO
Réseau	Gigabit Ethernet connector Internal USB connector for Wi-Fi Module
Usb	2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector USB micro-B Client port
Audio	SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks
Ports sériels	Debug UART interface, TTL voltage level. SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V) Other serial interfaces on the expansion connector: SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level); SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level); SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)
Autres Interfaces	Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector; Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs * Please note that some of these interfaces are factory options, other configurations are made via SW.
Alimentation	+12VDC; Additional embedded Low Power RTC; SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included) SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery
Système d’exploitation	Free Android and Linux community BSP available at UDOO.org SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us Yocto Guideline valid for SECO BSP Linux
Température de fonctionnement	0°C ÷ +60 °C (commercial temp.) For industrial temp. (-40°C ÷ +85°C) please contact us *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	110 x 86.5 mm (4.5” x 3.7”)

Logiciel

Lien	SECO Technical Resources

Documentation

Data Sheet	[Datasheet] SBC-MX6 Rel 4.4 [Reference Schematics] DORIS
Manual	[Manual] DORIS Rel 2.3
Image	[Picture] DORIS_front

Part Number

Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.

Articles du produit groupé
SYS-A62-LITE-CSCA	Description n° pièce SBC-A62-J, LITE version (i.MX6DL,1GB RAM, 4GB eMMC) w/ small Heatsink, Comm. Temp	Contactez-nous
SYS-A62-LITE-ILCA	Description n° pièce SBC-A62-J System, LITE version (CPU 800MHz i.MX6 DualLIte) w/Large Heatsink, industrial temperature	Contactez-nous
SYS-A62-LITE-ISCA	Description n° pièce SBC-A62-J System, LITE version (CPU 800MHz i.MX6 DualLIte) w/Small Heatsink, industrial temperature	Contactez-nous
SYS-A62-QUAD-CLCA	Description n° pièce SBC-A62-J, QUAD version (i.MX6Q,1GB RAM, 4GB eMMC) w/ large Heatsink, Comm. Temp	Contactez-nous
SYS-A62-QUAD-ILCA	Description n° pièce SBC-A62-J, QUAD version (i.MX6Q,1GB RAM, 4GB eMMC) w/ large Heatsink, Ind. Temp	Contactez-nous
SYS-A62-QUAD_2-ILCA	Description n° pièce SBC-A62-J System, QUAD version (CPU 800MHz i.MX6Q Quad) w/ 2GB RAM, Large Heatsink, industrial temperature	Contactez-nous
SYS-A62-SOLO-CSCA	Description n° pièce SBC-A62-J, SOLO version (i.MX6S,512MB RAM, 4GB eMMC) w/ small Heatsink, Comm. Temp	Contactez-nous
SYS-A62-SOLO-ISCA	Description n° pièce SBC-A62-J System, SOLO version (CPU 800MHz i.MX6 Solo) w/Small Heatsink, industrial temperature	Contactez-nous

Accessories

Vous n'avez pas trouvé la solution que vous cherchez?

Le produit standard ne répond pas à vos besoins? SECO est à votre disposition pour développer ensemble une solution hardware et logicielle partiellement ou entièrement personnalisée.