Accueil
SBC-3.5-MX8X

Skip to the beginning of the images gallery

SBC-3.5-MX8X

SBC de 3,5" avec processeurs NXP i.MX 8X. (VESTA - C57)

Available in Industrial Temperature Range

Feuille de données

Wiki

Contactez-nous pour plus d’informations et un devis

Contactez-nous

Cpu

NXP i.MX 8 Family

Graphiques

GC7000Lite with up to 16 Execution Units

Connectivité

2x GbE; miniPCI-e slot; 1x USB3.0; 2x USB 2.0; Expansion header

Mémoire

Soldered on-board LPDDR4 memory, frequency up to 1200MHz

Détails produit

Info technique

Description	SBC de 3,5" avec processeurs NXP i.MX 8X
Cpu	NXP i.MX 8X family SoCs: Dual or Quad ARM Cortex®-A35 Cores + 1x Cortex® M4F core for real-time processing NXP i.MX8 QuadXplus, 4x ARM Cortex®-A35 Cores + 1x Cortex® M4F core for real-time processing NXP i.MX8 DualXplus, 2x ARM Cortex®-A35 Cores + 1x Cortex® M4F core for real-time processing
Cores max	4+1
Mémoire	Soldered down LPDDR4 memory @ 1200MHz, 32-bit interface, up to 4GB
Graphiques	Embedded GC7000Lite GPU Supports OpenGL 3.0, 2.1, OpenGL ES 3.1, OpenCL 1.2 Full Profile and 1.1, OpenVG 1.1, and Vulkan Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2, VC-1, RV10, VP8, H.263 and MPEG4.2t, HW encoding of AVC/H.264 2 independent displays supported
Interfaces vidéo	Factory options: eDP 4-lane interface + LVDS single Channel 18-/24-bit interface LVDS Dual Channel / 2 x LVDS Single Channel interface
Résolution vidéo	Up to 1080p60
Stockage masse	Soldered onboard eMMC 5.1 Drive, up to 64GB QSPI NOR Flash soldered on-board
Réseau	Up to 2 x Gigabit Ethernet ports On-board WiFi 802.11 a/b/g/n + BT 5.0 module, optional
Usb	1x USB 3.0 Host ports on USB 3.0 Type-A socket 1x USB OTG Port on micro-AB connector (interface shared with USB 2.0 interface of USB 3.0 Type-A socket) 2x USB 2.0 Host ports on Dual Type-A socket 1x USB 2.0 Host port on miniPCI-e Slot
Pci	Optional mini PCI-e Slot
Audio	I2S Audio codec Mic In + Hp-Out on TRRS combo connector Line Out + 2x Mic-In interfaces on internal connector
Ports sériels	1x UART on expansion connector, optionally with RS-232 interface 1x UART on expansion connector, optionally with RS-485 interface 1x CAN port, available at TTL Level on expansion connector or with CAN transceiver on dedicated connector 2x Debug UARTs on dedicated connectors
Autres Interfaces	Available on expansion connector: • 16x GPIOs • I2C interface • 2x analog inputs • 1x PWM Power and reset button input on dedicated connector
Alimentation	Factory option, +12VDC or +24 VDC input voltage DC power jack or 2-poles PCB terminal block for voltage supply RTC battery
Système d’exploitation	Linux
Température de fonctionnement	-40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	146 x 102 mm (3,5'' form factor)

Logiciel

Lien	SECO Technical Resources

Documentation

Data Sheet	[Datasheet] SBC-3.5-MX8X Rel 1.2
Manual	[Manual] VESTA Rel 1.2
Image	[Picture] VESTA_front [Picture] VESTA_back

Part Number

Articles du produit groupé
SC57-2233-3052-C2	Description n° pièce VESTA SBC with i.MX8 QuadXPlus, 2GB RAM, 16GB eMMC, 2x GbE, mPCIe slot, CAN, RS-232, RS-485, eDP, LVDS, LED Driver, 24V power input on terminal block, Comm. Temp.	Contactez-nous
SC57-2233-3052-I2	Description n° pièce VESTA SBC with i.MX8 QuadXPlus, 2GB RAM, 16GB eMMC, 2x GbE, mPCIe slot, CAN, RS-232, RS-485, eDP, LVDS, LED Driver, 24V power input on terminal block, Comm. Temp.	Contactez-nous
SC57-2343-3052-C2	Description n° pièce VESTA SBC with i.MX8 QuadXPlus, 4GB RAM, 32GB eMMC, 2x GbE, mPCIe slot, CAN, RS-232, RS-485, eDP, LVDS, LED Driver, 24V power input on terminal block, Comm. Temp.	Contactez-nous
SC57-2343-3052-I2	Description n° pièce VESTA SBC with i.MX8 QuadXPlus, 4GB RAM, 32GB eMMC, 2x GbE, mPCIe slot, CAN, RS-232, RS-485, eDP, LVDS, LED Driver, 24V power input on terminal block, Ind. Temp.	Contactez-nous

Visitez notre boutique

Achetez et recevez immédiatement les produits SECO

Aller au boutique

Accessories

Vous n'avez pas trouvé la solution que vous cherchez?

Le produit standard ne répond pas à vos besoins? SECO est à votre disposition pour développer ensemble une solution hardware et logicielle partiellement ou entièrement personnalisée.

SBC-3.5-MX8X

Détails produit

Visitez notre boutique

Vous n'avez pas trouvé la solution que vous cherchez?

Subscribe to newsletter