Accueil
SBC-3.5-MX8

Skip to the beginning of the images gallery

SBC-3.5-MX8

SBC de 3,5" avec processeurs NXP i.MX8. (THEMIS - C43)

Available in Industrial Temperature Range

Feuille de données

Wiki

Contactez-nous pour plus d’informations et un devis

Contactez-nous

Cpu

NXP i.MX 8 Family

Graphiques

2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit/XVSX (QuadMax and QuadPlus)

Connectivité

2x Gigabit Ethernet interfaces

Mémoire

Soldered down LPDDR4

Détails produit

Info technique

Description	3.5" SBC Industrial ARM solution for IoT edge computing applications
Cpu	NXP i.MX 8 Family: i.MX 8QuadMax: 2x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F i.MX 8QuadPlus: 1x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F
Cores max	8
Mémoire	Soldered down LPDDR4 memory, 64-bit interface, 1600MHz. Base configuration 2GB, up-scalable to 4GB, 6GB, 8GB
Graphiques	2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit / XVSX (QuadMax and QuadPlus) 1x embedded VPU, supporting H.265 (4K30) and H.264 (1080p60) decoding and H.264 (1080p30) encoding Supports 3 independent video outputs (total combined resolution 4K)
Interfaces vidéo	OUTPUTS: HDMI® output (Micro) Optional eDP 1.4 interface Optional Single/Dual-Channel 18-/24- bit LVDS interface INPUTS: HDMI® input 2x 4-lanes MIPI-CSI Camera interfaces
Résolution vidéo	HDMI®: Up to UltraHD (4K) LVDS, eDP: up to 1080p
Stockage masse	eMMC 5.1 Drive soldered on-board, up to 64GB 1x S-ATA interface available on M.2 Socket 2 Key B Slot (interface shared with PCI-e x1) microSD Card Slot 4MB QuadSPI Flash NAND (boot device only)
Réseau	2x Gigabit Ethernet interfaces Combo WiFi 802.11 a/b/g/n/ac + BT LE 4.2 module with ceramic SMT antennas on-board M.2 Socket 2 Key B Slot for M.2 Modems M.2 Socket1 Key E Slot for WiFi + BT external modules
Usb	1 x USB 3.0 Host port on Type-A socket 1x USB 2.0 OTG port on micro-AB socket 1x USB 2.0 Host port on external Type-A socket 1x USB 2.0 Host port on internal connector 2 x USB 2.0 ports available on M.2 Key B and Key E slots
Audio	I2S Audio Codec HP + MIC interfaces, available on a single combo TRRS connector
Ports sériels	1x UART TTL 1x RS-232 / UART TTL configurable 1x RS-485 / RS-422 / UART TTL configurable 3x CAN interfaces
Autres Interfaces	4x Analog Inputs 6x GPIOs SPI interface I2C interface Embedded additional RTC circuitry for lowest power consumption SIM dedicated slot
Alimentation	+12VDC ± 10%
Système d’exploitation	Wind River Linux Yocto Android
Température de fonctionnement	0°C ÷ +60°C (Commercial version) -40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	146 x 102 mm (5,75” x 4,02”)

Logiciel

Lien	SECO Technical Resources

Documentation

Data Sheet	[Datasheet] SBC-3.5-MX8 Rel 1.3
Manual	[Manual] SBC-3.5-MX8 Rel 1.0 (only for Rev A/Rev B) [Manual] SBC-3.5-MX8 Rel 2.2 (only for Rev C/Rev D)
Image	[Picture] SBC-3.5-MX8_front [Picture] SBC-3.5-MX8_back scont

Part Number

Articles du produit groupé
SC43-3341-1211-I2	Description n° pièce SBC-C43 w/i.MX8QuadMax @1.6GHz, 8GB LPDDR4, 32GB eMMC, LVDS(12V,3.3V)+eDP(12V,3.3V)+HDMI, CSI, HDMI in, GbE+USB3.0 conn, GbE+USB2.0 conn, M.2 KeyE, M.2 Key B, 3x CAN, 1x RS-232, 1x RS-422/485, 4xAnalog In, Ind. Temp.	Contactez-nous

Visitez notre boutique

Achetez et recevez immédiatement les produits SECO

Aller au boutique

Vous n'avez pas trouvé la solution que vous cherchez?

Le produit standard ne répond pas à vos besoins? SECO est à votre disposition pour développer ensemble une solution hardware et logicielle partiellement ou entièrement personnalisée.

SBC-3.5-MX8

Détails produit

Visitez notre boutique

Vous n'avez pas trouvé la solution que vous cherchez?

Subscribe to newsletter